Water Conditioners

SeaChem Discus Buffer helps to replicate the ideal Discus environment (low pH and low GH (General Hardness)). Discus Buffer will lower pH and keep it lowered. Discus Buffer also softens water by precipitating calcium and magnesium.

• Adjusts pH to 5.8 - 6.8
• Helps to replicate the ideal Discus environment
• Softens water by precipitating calcium and magnesium

Use SeaChem Discus Trace to restore the proper level of trace elements required by thriving, healthy Discus.

Directions: Use 1 level teaspoon (7 g) for every 40-80 L (10-20 gallons) daily until intended pH is reached. Thereafter, use once a month or with water changes as required to maintain pH

Tanganyika Buffer is a blend of carbonate salts designed to enhance the natural environment of cichlids by increasing alkalinity, carbonate hardness, buffer capacity, and pH. It is formulated to maintain a pH of 9.0 to 9.4.

• Designed to enhance the natural environment of cichlids
• Increases water hardness, buffer capacity, and pH.
• Formulated to maintain a pH of 9.0 to 9.4

Instructions: Use 5 g (1 level teaspoon) for each 40 to 80 L (10 to 20 US gallons) of water each day until desired pH is attained and maintained. Thereafter, use as required to maintain pH, usually no more than once every two to three weeks.

TIPS: It is best to dissolve the buffer in freshwater before use. Use when setting up an aquarium or making water changes (preferably after the addition of Seachem Cichlid Lake Salt) and between water changes as needed to maintain pH. Seachem Tanganyika Buffer is formulated to maintain a pH between 9.0 and 9.4, depending on the amount used. For lower pH, use Malawi/Victoria Buffer (pH 7.8 so 8.4), either alone or in combination with Tanganyika Buffer.

Seachem Malawi/Victoria Buffer is a blend of carbonate salts designed to enhance the natural environment of cichlids by increasing hardness and buffer capacity, and reaching and maintaining a healthy pH range of 7.8-8.4.

• Raises and maintains a pH range of 7.8 - 8.4
• Freshwater aquarium additive increases water hardness (alkalinity)
• pH conditioner/buffer for Malawi and Victoria cichlids

For optimum replication of the Malawi/Victoria environment, use with Cichlid Lake Salt and Cichlid Trace.

Directions: Use 5 g (1 level teaspoon) for each 10 to 20 gallons of water each day until desired pH is attained and maintained. Thereafter, use as required to maintain pH, usually no more than once every two to three weeks.

Tips: It is best to dissolve the buffer in freshwater before use. Use when setting up an aquarium or making water changes (preferably after the addition of Seachems Cichlid Lake Salt) and between water changes as needed to maintain pH. Seachems Malawi/Victoria Buffer is formulated to maintain a pH between 7.8 and 8.4, depending on the amount used. To attain a lower pH than 7.8, you may use Seachems Acid Buffer in combination with Malawi/Victoria Buffer. To attain a higher pH than 8.4, use Tanganyika Buffer.

Seachem Malawi/Victoria Buffer is a blend of carbonate salts designed to enhance the natural environment of cichlids by increasing hardness and buffer capacity, and reaching and maintaining a healthy pH range of 7.8-8.4.

• Raises and maintains a pH range of 7.8 - 8.4
• Freshwater aquarium additive increases water hardness (alkalinity)
• pH conditioner/buffer for Malawi and Victoria cichlids

For optimum replication of the Malawi/Victoria environment, use with Cichlid Lake Salt and Cichlid Trace.

Directions: Use 5 g (1 level teaspoon) for each 10 to 20 gallons of water each day until desired pH is attained and maintained. Thereafter, use as required to maintain pH, usually no more than once every two to three weeks.

Tips: It is best to dissolve the buffer in freshwater before use. Use when setting up an aquarium or making water changes (preferably after the addition of Seachems Cichlid Lake Salt) and between water changes as needed to maintain pH. Seachems Malawi/Victoria Buffer is formulated to maintain a pH between 7.8 and 8.4, depending on the amount used. To attain a lower pH than 7.8, you may use Seachems Acid Buffer in combination with Malawi/Victoria Buffer. To attain a higher pH than 8.4, use Tanganyika Buffer.

Seachem Malawi/Victoria Buffer is a blend of carbonate salts designed to enhance the natural environment of cichlids by increasing hardness and buffer capacity, and reaching and maintaining a healthy pH range of 7.8-8.4.

• Raises and maintains a pH range of 7.8 - 8.4
• Freshwater aquarium additive increases water hardness (alkalinity)
• pH conditioner/buffer for Malawi and Victoria cichlids

For optimum replication of the Malawi/Victoria environment, use with Cichlid Lake Salt and Cichlid Trace.

Directions: Use 5 g (1 level teaspoon) for each 10 to 20 gallons of water each day until desired pH is attained and maintained. Thereafter, use as required to maintain pH, usually no more than once every two to three weeks.

Tips: It is best to dissolve the buffer in freshwater before use. Use when setting up an aquarium or making water changes (preferably after the addition of Seachems Cichlid Lake Salt) and between water changes as needed to maintain pH. Seachems Malawi/Victoria Buffer is formulated to maintain a pH between 7.8 and 8.4, depending on the amount used. To attain a lower pH than 7.8, you may use Seachems Acid Buffer in combination with Malawi/Victoria Buffer. To attain a higher pH than 8.4, use Tanganyika Buffer.

Seachem Neutral Regulator adjusts pH to neutral (pH 7.0) from either a low or high pH and maintains it there. It softens water by precipitating calcium and magnesium while removing any chlorine, chloramine, or ammonia.

• Adjusts high or low pH to 7.0
• Removes chlorine, chloramines and ammonia
• Makes other conditioning unnecessary

The use of SeaChem Neutral Regulator makes other conditioning unnecessary. To lower pH below 7.0 use Neutral Regulator with Acid Regulator (or Discus Buffer). To raise pH above 7.0 use with Alkaline Regulator. All of these products will enhance and stabilize the freshwater aquarium environment.

Use Fresh Trace to restore the proper level of trace elements required by thriving, healthy freshwater community fish.

Seachem Neutral Regulator adjusts pH to neutral (pH 7.0) from either a low or high pH and maintains it there. It softens water by precipitating calcium and magnesium while removing any chlorine, chloramine, or ammonia.

• Adjusts high or low pH to 7.0
• Removes chlorine, chloramines and ammonia
• Makes other conditioning unnecessary

The use of SeaChem Neutral Regulator makes other conditioning unnecessary. To lower pH below 7.0 use Neutral Regulator with Acid Regulator (or Discus Buffer). To raise pH above 7.0 use with Alkaline Regulator. All of these products will enhance and stabilize the freshwater aquarium environment.

Use Fresh Trace to restore the proper level of trace elements required by thriving, healthy freshwater community fish.

Seachem Neutral Regulator adjusts pH to neutral (pH 7.0) from either a low or high pH and maintains it there. It softens water by precipitating calcium and magnesium while removing any chlorine, chloramine, or ammonia.

• Adjusts high or low pH to 7.0
• Removes chlorine, chloramines and ammonia
• Makes other conditioning unnecessary

The use of SeaChem Neutral Regulator makes other conditioning unnecessary. To lower pH below 7.0 use Neutral Regulator with Acid Regulator (or Discus Buffer). To raise pH above 7.0 use with Alkaline Regulator. All of these products will enhance and stabilize the freshwater aquarium environment.

Use Fresh Trace to restore the proper level of trace elements required by thriving, healthy freshwater community fish.

Seachem Marine Buffer will safely raise the pH of saltwater to 8.3, and will not raise the pH above 8.3 even if overdosed. Marine Buffer is a blended product, and contains sodium, magnesium, calcium, strontium, and potassium salts to provide effective results.

• Safely raises and maintains saltwater pH to 8.3
• More stable than sodium bicarbonate or sodium bicarbonate substitutes
• Will not raise pH above 8.3 even if inadvertently overdosed

Seachem Marine Buffer is not just sodium bicarbonate or sodium carbonate (commonly sold as a substitute), as these products can raise pH to dangerous levels if not used properly. Instead it includes a variety of minerals and potassium salts of carbonate, bicarbonate, chloride, sulfate, and borate for safe, accurate dosing.

Directions: Add 5g (1 level teaspoon) for each 20 gallons (80 L). Dissolve in at least one cup of freshwater. This dose will also raise alkalinity by about 1 meq/L. Add daily until pH stabilizes at 8.3. This will take from a day to a week, depending on original pH and alkalinity. Thereafter, use biweekly or monthly to maintain a pH of 8.3. If this practice is not adequate, then overstocking, overfeeding, or other poor management practice should be sought as a likely cause. In ionically balanced marine water, Marine Buffer produces little precipitate or cloudiness. If an extensive precipitate forms upon addition of Marine Buffer that does not dissolve within about 15 minutes, then poor ionic balance was present. A water change should be initiated when convenient before further use of the product. Effectiveness improves with continued use. Do not directly mix with any calcium, magnesium, or strontium supplement.

Note: Product is sold by weight, not volume. Contents may settle in shipment.

Seachem Marine Buffer will safely raise the pH of saltwater to 8.3, and will not raise the pH above 8.3 even if overdosed. Marine Buffer is a blended product, and contains sodium, magnesium, calcium, strontium, and potassium salts to provide effective results.

• Safely raises and maintains saltwater pH to 8.3
• More stable than sodium bicarbonate or sodium bicarbonate substitutes
• Will not raise pH above 8.3 even if inadvertently overdosed

Seachem Marine Buffer is not just sodium bicarbonate or sodium carbonate (commonly sold as a substitute), as these products can raise pH to dangerous levels if not used properly. Instead it includes a variety of minerals and potassium salts of carbonate, bicarbonate, chloride, sulfate, and borate for safe, accurate dosing.

Directions: Add 5g (1 level teaspoon) for each 20 gallons (80 L). Dissolve in at least one cup of freshwater. This dose will also raise alkalinity by about 1 meq/L. Add daily until pH stabilizes at 8.3. This will take from a day to a week, depending on original pH and alkalinity. Thereafter, use biweekly or monthly to maintain a pH of 8.3. If this practice is not adequate, then overstocking, overfeeding, or other poor management practice should be sought as a likely cause. In ionically balanced marine water, Marine Buffer produces little precipitate or cloudiness. If an extensive precipitate forms upon addition of Marine Buffer that does not dissolve within about 15 minutes, then poor ionic balance was present. A water change should be initiated when convenient before further use of the product. Effectiveness improves with continued use. Do not directly mix with any calcium, magnesium, or strontium supplement.

Note: Product is sold by weight, not volume. Contents may settle in shipment.

Seachem Marine Buffer will safely raise the pH of saltwater to 8.3, and will not raise the pH above 8.3 even if overdosed. Marine Buffer is a blended product, and contains sodium, magnesium, calcium, strontium, and potassium salts to provide effective results.

• Safely raises and maintains saltwater pH to 8.3
• More stable than sodium bicarbonate or sodium bicarbonate substitutes
• Will not raise pH above 8.3 even if inadvertently overdosed

Seachem Marine Buffer is not just sodium bicarbonate or sodium carbonate (commonly sold as a substitute), as these products can raise pH to dangerous levels if not used properly. Instead it includes a variety of minerals and potassium salts of carbonate, bicarbonate, chloride, sulfate, and borate for safe, accurate dosing.

Directions: Add 5g (1 level teaspoon) for each 20 gallons (80 L). Dissolve in at least one cup of freshwater. This dose will also raise alkalinity by about 1 meq/L. Add daily until pH stabilizes at 8.3. This will take from a day to a week, depending on original pH and alkalinity. Thereafter, use biweekly or monthly to maintain a pH of 8.3. If this practice is not adequate, then overstocking, overfeeding, or other poor management practice should be sought as a likely cause. In ionically balanced marine water, Marine Buffer produces little precipitate or cloudiness. If an extensive precipitate forms upon addition of Marine Buffer that does not dissolve within about 15 minutes, then poor ionic balance was present. A water change should be initiated when convenient before further use of the product. Effectiveness improves with continued use. Do not directly mix with any calcium, magnesium, or strontium supplement.

Note: Product is sold by weight, not volume. Contents may settle in shipment.

Seachem Safe Powder is a concentrated dry conditioner for freshwater and saltwater aquariums. This concentrated conditioning powder removes chlorine and chloramine from tap water, detoxifies nitrite and nitrate, and converts ammonia into a safe, non-toxic form for more efficient removal by the biofilter.

• Removes chlorine, chloramine and ammonia from water
• Detoxifies nitrite and nitrate
• Non-acidic, highly effective dry conditioner for fresh and saltwater

Seachem Safe Powder will not impact pH levels or overactivate skimmers. It may be used during tank cycling to alleviate ammonia/nitrite toxicity, during start-up or whenever adding or replacing water.

Note: Safe is the dry version of Seachem Prime and shares all of its advantages; however, Safe is even more concentrated than Prime.

Directions for Use:
Note: These directions supersede all other prior packaging.

Directions for 10 g and 50 g:
Use 100 mg Safe (scoop) per each 100 L (25 gallons) as needed to reduce chlorine and chloramine or per 25 L (6 gallons) for ammonia.

Directions for all other sizes:
Use 1.25 g (1/4 tsp.) for every 1,250 L (300 gallons) as needed to reduce chlorine and chloramine or use 1.25 g (1/4 tsp.) for every 300 L (75 gallons) for ammonia.

May be added to aquarium directly, but better if added to new water first. If adding directly to aquarium, base dose on aquarium volume. For exceptionally high chloramine concentrations, a double dose may be used safely. To detoxify nitrite and nitrate in an emergency, up to 4 times normal dose may be used. If temperature is > 30 °C (86 °F) and chlorine or ammonia levels are low, use a half dose.

Seachem Prime is the complete and concentrated conditioner for both fresh and saltwater aquariums. Use during startup and water changes to eliminate and detoxify harmful chemicals in tap water and make your aquarium safe for fish.

• Removes chlorine, chloramine and toxic ammonia
• Detoxifies nitrite and nitrate
• Provides protective slime coat

Prime is safe for fresh and saltwater aquariums. It detoxifies ammonia, nitrite and nitrate, allowing the biofilter to more efficiently remove them. Use Sechem Prime to detoxify any heavy metals found in the tap water at typical concentration levels. Prime also promotes the production and regeneration of the natural slime coat. Seachem Prime is non-acidic, will not impact pH and will not overactivate skimmers.

Use at startup and whenever adding or replacing water. Prime may also be used during tank cycling to alleviate ammonia/nitrite toxicity.

Directions: Use 1 capful (5 ml) for each 200 L (50 gallons) of new water. This removes approximately 1 mg/L ammonia, 4 mg/L chloramine, or 5 mg/L chlorine. For smaller doses, please note each cap thread is approx. 1 ml.

Tips: May be added to aquarium directly, but better if added to new water first. If adding directly to aquarium, base dose on aquarium volume. Sulfur odor is normal. For exceptionally high chloramine concentrations, a double dose may be used safely. To detoxify nitrite in an emergency, up to 5 times normal dose may be used. If temperature is > 30 °C (86 °F) and chlorine or ammonia levels are low, use a half dose.

Seachem Prime is the complete and concentrated conditioner for both fresh and saltwater aquariums. Use during startup and water changes to eliminate and detoxify harmful chemicals in tap water and make your aquarium safe for fish.

• Removes chlorine, chloramine and toxic ammonia
• Detoxifies nitrite and nitrate
• Provides protective slime coat

Prime is safe for fresh and saltwater aquariums. It detoxifies ammonia, nitrite and nitrate, allowing the biofilter to more efficiently remove them. Use Sechem Prime to detoxify any heavy metals found in the tap water at typical concentration levels. Prime also promotes the production and regeneration of the natural slime coat. Seachem Prime is non-acidic, will not impact pH and will not overactivate skimmers.

Use at startup and whenever adding or replacing water. Prime may also be used during tank cycling to alleviate ammonia/nitrite toxicity.

Directions: Use 1 capful (5 ml) for each 200 L (50 gallons) of new water. This removes approximately 1 mg/L ammonia, 4 mg/L chloramine, or 5 mg/L chlorine. For smaller doses, please note each cap thread is approx. 1 ml.

Tips: May be added to aquarium directly, but better if added to new water first. If adding directly to aquarium, base dose on aquarium volume. Sulfur odor is normal. For exceptionally high chloramine concentrations, a double dose may be used safely. To detoxify nitrite in an emergency, up to 5 times normal dose may be used. If temperature is > 30 °C (86 °F) and chlorine or ammonia levels are low, use a half dose.

Seachem Prime is the complete and concentrated conditioner for both fresh and saltwater aquariums. Use during startup and water changes to eliminate and detoxify harmful chemicals in tap water and make your aquarium safe for fish.

• Removes chlorine, chloramine and toxic ammonia
• Detoxifies nitrite and nitrate
• Provides protective slime coat

Prime is safe for fresh and saltwater aquariums. It detoxifies ammonia, nitrite and nitrate, allowing the biofilter to more efficiently remove them. Use Sechem Prime to detoxify any heavy metals found in the tap water at typical concentration levels. Prime also promotes the production and regeneration of the natural slime coat. Seachem Prime is non-acidic, will not impact pH and will not overactivate skimmers.

Use at startup and whenever adding or replacing water. Prime may also be used during tank cycling to alleviate ammonia/nitrite toxicity.

Directions: Use 1 capful (5 ml) for each 200 L (50 gallons) of new water. This removes approximately 1 mg/L ammonia, 4 mg/L chloramine, or 5 mg/L chlorine. For smaller doses, please note each cap thread is approx. 1 ml.

Tips: May be added to aquarium directly, but better if added to new water first. If adding directly to aquarium, base dose on aquarium volume. Sulfur odor is normal. For exceptionally high chloramine concentrations, a double dose may be used safely. To detoxify nitrite in an emergency, up to 5 times normal dose may be used. If temperature is > 30 °C (86 °F) and chlorine or ammonia levels are low, use a half dose.

Seachem Prime is the complete and concentrated conditioner for both fresh and saltwater aquariums. Use during startup and water changes to eliminate and detoxify harmful chemicals in tap water and make your aquarium safe for fish.

• Removes chlorine, chloramine and toxic ammonia
• Detoxifies nitrite and nitrate
• Provides protective slime coat

Prime is safe for fresh and saltwater aquariums. It detoxifies ammonia, nitrite and nitrate, allowing the biofilter to more efficiently remove them. Use Sechem Prime to detoxify any heavy metals found in the tap water at typical concentration levels. Prime also promotes the production and regeneration of the natural slime coat. Seachem Prime is non-acidic, will not impact pH and will not overactivate skimmers.

Use at startup and whenever adding or replacing water. Prime may also be used during tank cycling to alleviate ammonia/nitrite toxicity.

Directions: Use 1 capful (5 ml) for each 200 L (50 gallons) of new water. This removes approximately 1 mg/L ammonia, 4 mg/L chloramine, or 5 mg/L chlorine. For smaller doses, please note each cap thread is approx. 1 ml.

Tips: May be added to aquarium directly, but better if added to new water first. If adding directly to aquarium, base dose on aquarium volume. Sulfur odor is normal. For exceptionally high chloramine concentrations, a double dose may be used safely. To detoxify nitrite in an emergency, up to 5 times normal dose may be used. If temperature is > 30 °C (86 °F) and chlorine or ammonia levels are low, use a half dose.

Seachem Prime is the complete and concentrated conditioner for both fresh and saltwater aquariums. Use during startup and water changes to eliminate and detoxify harmful chemicals in tap water and make your aquarium safe for fish.

• Removes chlorine, chloramine and toxic ammonia
• Detoxifies nitrite and nitrate
• Provides protective slime coat

Prime is safe for fresh and saltwater aquariums. It detoxifies ammonia, nitrite and nitrate, allowing the biofilter to more efficiently remove them. Use Sechem Prime to detoxify any heavy metals found in the tap water at typical concentration levels. Prime also promotes the production and regeneration of the natural slime coat. Seachem Prime is non-acidic, will not impact pH and will not overactivate skimmers.

Use at startup and whenever adding or replacing water. Prime may also be used during tank cycling to alleviate ammonia/nitrite toxicity.

Directions: Use 1 capful (5 ml) for each 200 L (50 gallons) of new water. This removes approximately 1 mg/L ammonia, 4 mg/L chloramine, or 5 mg/L chlorine. For smaller doses, please note each cap thread is approx. 1 ml.

Tips: May be added to aquarium directly, but better if added to new water first. If adding directly to aquarium, base dose on aquarium volume. Sulfur odor is normal. For exceptionally high chloramine concentrations, a double dose may be used safely. To detoxify nitrite in an emergency, up to 5 times normal dose may be used. If temperature is > 30 °C (86 °F) and chlorine or ammonia levels are low, use a half dose.

Seachem Prime is the complete and concentrated conditioner for both fresh and saltwater aquariums. Use during startup and water changes to eliminate and detoxify harmful chemicals in tap water and make your aquarium safe for fish.

• Removes chlorine, chloramine and toxic ammonia
• Detoxifies nitrite and nitrate
• Provides protective slime coat

Prime is safe for fresh and saltwater aquariums. It detoxifies ammonia, nitrite and nitrate, allowing the biofilter to more efficiently remove them. Use Sechem Prime to detoxify any heavy metals found in the tap water at typical concentration levels. Prime also promotes the production and regeneration of the natural slime coat. Seachem Prime is non-acidic, will not impact pH and will not overactivate skimmers.

Use at startup and whenever adding or replacing water. Prime may also be used during tank cycling to alleviate ammonia/nitrite toxicity.

Directions: Use 1 capful (5 ml) for each 200 L (50 gallons) of new water. This removes approximately 1 mg/L ammonia, 4 mg/L chloramine, or 5 mg/L chlorine. For smaller doses, please note each cap thread is approx. 1 ml.

Tips: May be added to aquarium directly, but better if added to new water first. If adding directly to aquarium, base dose on aquarium volume. Sulfur odor is normal. For exceptionally high chloramine concentrations, a double dose may be used safely. To detoxify nitrite in an emergency, up to 5 times normal dose may be used. If temperature is > 30 °C (86 °F) and chlorine or ammonia levels are low, use a half dose.

Seachem Prime is the complete and concentrated conditioner for both fresh and saltwater aquariums. Use during startup and water changes to eliminate and detoxify harmful chemicals in tap water and make your aquarium safe for fish.

• Removes chlorine, chloramine and toxic ammonia
• Detoxifies nitrite and nitrate
• Provides protective slime coat

Prime is safe for fresh and saltwater aquariums. It detoxifies ammonia, nitrite and nitrate, allowing the biofilter to more efficiently remove them. Use Sechem Prime to detoxify any heavy metals found in the tap water at typical concentration levels. Prime also promotes the production and regeneration of the natural slime coat. Seachem Prime is non-acidic, will not impact pH and will not overactivate skimmers.

Use at startup and whenever adding or replacing water. Prime may also be used during tank cycling to alleviate ammonia/nitrite toxicity.

Directions: Use 1 capful (5 ml) for each 200 L (50 gallons) of new water. This removes approximately 1 mg/L ammonia, 4 mg/L chloramine, or 5 mg/L chlorine. For smaller doses, please note each cap thread is approx. 1 ml.

Tips: May be added to aquarium directly, but better if added to new water first. If adding directly to aquarium, base dose on aquarium volume. Sulfur odor is normal. For exceptionally high chloramine concentrations, a double dose may be used safely. To detoxify nitrite in an emergency, up to 5 times normal dose may be used. If temperature is > 30 °C (86 °F) and chlorine or ammonia levels are low, use a half dose.

Seachem Prime is the complete and concentrated conditioner for both fresh and saltwater aquariums. Use during startup and water changes to eliminate and detoxify harmful chemicals in tap water and make your aquarium safe for fish.

• Removes chlorine, chloramine and toxic ammonia
• Detoxifies nitrite and nitrate
• Provides protective slime coat

Prime is safe for fresh and saltwater aquariums. It detoxifies ammonia, nitrite and nitrate, allowing the biofilter to more efficiently remove them. Use Sechem Prime to detoxify any heavy metals found in the tap water at typical concentration levels. Prime also promotes the production and regeneration of the natural slime coat. Seachem Prime is non-acidic, will not impact pH and will not overactivate skimmers.

Use at startup and whenever adding or replacing water. Prime may also be used during tank cycling to alleviate ammonia/nitrite toxicity.

Directions: Use 1 capful (5 ml) for each 200 L (50 gallons) of new water. This removes approximately 1 mg/L ammonia, 4 mg/L chloramine, or 5 mg/L chlorine. For smaller doses, please note each cap thread is approx. 1 ml.

Tips: May be added to aquarium directly, but better if added to new water first. If adding directly to aquarium, base dose on aquarium volume. Sulfur odor is normal. For exceptionally high chloramine concentrations, a double dose may be used safely. To detoxify nitrite in an emergency, up to 5 times normal dose may be used. If temperature is > 30 °C (86 °F) and chlorine or ammonia levels are low, use a half dose.

Seachem StressGuard is a premium slime coat protector for marine and freshwater aquariums. Using a unique formula, StressGuard reduces fish stress from transportation or handling, promotes healing, and acts as an antiseptic to reduce the risk of infection.

• Premium slime coat protection product for fresh and saltwater aquariums
• Reduces stress when handling or transporting fish
• Promotes healing and acts as an antiseptic for fish

StressGuard is compatible with all non-copper based medications. It is not amine-based and will not interfere with Purigen or HyperSorb, and does not coat resins or clog filtration like other slime coat products can.

What sets StressGuard apart The secret is a protein active colloidal agent that actively seeks out any wounds, abrasions, or exposed proteins, and attaches to the area to deliver disinfectant and begin healing. In the process, the agent also acts as a liquid bandage to keep the abrasion protected. And unlike other slime coats, StressGuard has a pH of 7.0 - meaning it will never interfere with the pH of your aquarium, even when used in large doses.

Directions: Use 1/2–1 capful (2.5–5 mL) to every 10 gallons (40 L) daily until signs of stress have abated or healing is complete. Dose may be safely doubled.

Seachem StressGuard is a premium slime coat protector for marine and freshwater aquariums. Using a unique formula, StressGuard reduces fish stress from transportation or handling, promotes healing, and acts as an antiseptic to reduce the risk of infection.

• Premium slime coat protection product for fresh and saltwater aquariums
• Reduces stress when handling or transporting fish
• Promotes healing and acts as an antiseptic for fish

StressGuard is compatible with all non-copper based medications. It is not amine-based and will not interfere with Purigen or HyperSorb, and does not coat resins or clog filtration like other slime coat products can.

What sets StressGuard apart The secret is a protein active colloidal agent that actively seeks out any wounds, abrasions, or exposed proteins, and attaches to the area to deliver disinfectant and begin healing. In the process, the agent also acts as a liquid bandage to keep the abrasion protected. And unlike other slime coats, StressGuard has a pH of 7.0 - meaning it will never interfere with the pH of your aquarium, even when used in large doses.

Directions: Use 1/2–1 capful (2.5–5 mL) to every 10 gallons (40 L) daily until signs of stress have abated or healing is complete. Dose may be safely doubled.

Seachem StressGuard is a premium slime coat protector for marine and freshwater aquariums. Using a unique formula, StressGuard reduces fish stress from transportation or handling, promotes healing, and acts as an antiseptic to reduce the risk of infection.

• Premium slime coat protection product for fresh and saltwater aquariums
• Reduces stress when handling or transporting fish
• Promotes healing and acts as an antiseptic for fish

StressGuard is compatible with all non-copper based medications. It is not amine-based and will not interfere with Purigen or HyperSorb, and does not coat resins or clog filtration like other slime coat products can.

What sets StressGuard apart The secret is a protein active colloidal agent that actively seeks out any wounds, abrasions, or exposed proteins, and attaches to the area to deliver disinfectant and begin healing. In the process, the agent also acts as a liquid bandage to keep the abrasion protected. And unlike other slime coats, StressGuard has a pH of 7.0 - meaning it will never interfere with the pH of your aquarium, even when used in large doses.

Directions: Use 1/2–1 capful (2.5–5 mL) to every 10 gallons (40 L) daily until signs of stress have abated or healing is complete. Dose may be safely doubled.

Seachem ParaGuard is the only fish and filter safe aldehyde based (10% by weight) parasite control product available. Unlike highly toxic and difficult to use formalin based medications, Seachem ParaGuard contains no formaldehyde or methanol and will not alter pH.

• Parasite Control for marine or freshwater aquariums
• Contains no toxic methanol and will not alter pH
• Safe alternative to formalin

Seachem ParaGuard employs a proprietary, synergistic blend of aldehydes, malachite green, and fish protective polymers that effectively and efficiently eradicates many ectoparasites (e.g. ich, etc.) and external fungal/bacterial/viral lesions (e.g., fin rot).

It is particularly useful in hospital and receiving tanks for new fish and whenever new fish are introduced to a community tank.

DIRECTIONS: In the aquarium, use 5 mL (1 capful) to every 40 L (10 gallons). Repeat daily as required as long as fish show no stress. For 1 hour dips, use 3 mL per 4 L (1 gallon). Dips may be extended if fish show no evidence of stress. In case of eye exposure, promptly and thoroughly wash eyes with water and seek medical attention.

Seachem ParaGuard is the only fish and filter safe aldehyde based (10% by weight) parasite control product available. Unlike highly toxic and difficult to use formalin based medications, Seachem ParaGuard contains no formaldehyde or methanol and will not alter pH.

• Parasite Control for marine or freshwater aquariums
• Contains no toxic methanol and will not alter pH
• Safe alternative to formalin

Seachem ParaGuard employs a proprietary, synergistic blend of aldehydes, malachite green, and fish protective polymers that effectively and efficiently eradicates many ectoparasites (e.g. ich, etc.) and external fungal/bacterial/viral lesions (e.g., fin rot).

It is particularly useful in hospital and receiving tanks for new fish and whenever new fish are introduced to a community tank.

DIRECTIONS: In the aquarium, use 5 mL (1 capful) to every 40 L (10 gallons). Repeat daily as required as long as fish show no stress. For 1 hour dips, use 3 mL per 4 L (1 gallon). Dips may be extended if fish show no evidence of stress. In case of eye exposure, promptly and thoroughly wash eyes with water and seek medical attention.

Seachem ParaGuard is the only fish and filter safe aldehyde based (10% by weight) parasite control product available. Unlike highly toxic and difficult to use formalin based medications, Seachem ParaGuard contains no formaldehyde or methanol and will not alter pH.

• Parasite Control for marine or freshwater aquariums
• Contains no toxic methanol and will not alter pH
• Safe alternative to formalin

Seachem ParaGuard employs a proprietary, synergistic blend of aldehydes, malachite green, and fish protective polymers that effectively and efficiently eradicates many ectoparasites (e.g. ich, etc.) and external fungal/bacterial/viral lesions (e.g., fin rot).

It is particularly useful in hospital and receiving tanks for new fish and whenever new fish are introduced to a community tank.

DIRECTIONS: In the aquarium, use 5 mL (1 capful) to every 40 L (10 gallons). Repeat daily as required as long as fish show no stress. For 1 hour dips, use 3 mL per 4 L (1 gallon). Dips may be extended if fish show no evidence of stress. In case of eye exposure, promptly and thoroughly wash eyes with water and seek medical attention.

SulfaPlex is an effective and safe treatment for many bacterial, fungal and protozoan infestations in the aquarium. While it can be used in both freshwater and saltwater, it is particularly effective against the common bacterial and fungal infections of freshwater fish. It is also among the gentler antibiotics, and great for treating fish that are already stressed. It is easily removed with carbon and does not impair nitrification.

• Treats Many Bacterial, Fungal, and Protozoan Infestations
• Broad Spectrum Antibiotic and Anti-Fungal Medicatoin
• Absorbed Through Gills
• Marine & Freshwater
• One of the Gentler Antibiotics, Great for Treating Fish that are Already Stressed.

INSTRUCTIONS: Dosing in Water Remove all invertebrates - these are extremely sensitive to medication. Turn off UV filters, ozone filters, and remove chemical filtration like MatrixCarbon and Purigen. Use 2-3 measures (included) per every 40 L (10 US gallons). Repeat this dose every 72 hours for a maximum of 3 weeks. Dosing in Food SulfaPlex is most effective when used in the water, but it can also be added to the food. Feed the medicated food mix (recipe below) every day until the infection clears or up to 3 weeks. 1 scoop SulfaPlex, 1 scoop Focus, 1 tbsp food (preferably pellets or frozen food). A few drops of water if using a dry food. To enhance palatability use with GarlicGuard or Entice. After Treating When the treatment period is over, SulfaPlex can easily be removed using activated filter carbon like MatrixCarbon. It does not linger in the substrate or filter media of the tank.

INGREDIENTS: sulfathiazole (69%) Inactive ingredients: excipients (31%)

Seachem Replenish is specially designed to replenish physiologically needed minerals that have been removed during reverse osmosis or deionizing filtration.

• Designed to replenish physiologically needed minerals
• Restore General Hardness (GH) using "soft" and "hard" salts
• Helps prevent sudden death due to osmotic stress

Replenish will restore General Hardness (GH) using "soft" and "hard" salts. This special blend of salts will help prevent sudden death due to osmotic stress which causes osmotic shock.

Dosage: 500 ml (16.9 oz) treats 1,000 gallons.

Directions: Add 5 mL (1 capful) Replenish to 10 Gallons to raise GH by 1 meq/L (2.8 dGH). Recommended restoration level into DI or RO water is 1-2 meq/L which is 5 mL per each 5-10 gallons.

Weco Wonder Shells are great for pH, calcium and water hardness control in small aquariums and fish bowls. These all-in-one treatments provide calcium carbonate, sodium thiosulfate, and necessary trace elements, including magnesium.

• Helps keep aquarium clear and maintains stable pH levels
• Adds necessary minerals while removing chlorine
• Great for goldfish, livebearers, cichlids and more

Weco Wonder Shells provide magnesium and calcium, which have been proven to help fish during stress and to prevent disease due to acid buildup in the body. These shells instantly remove chlorine and chloramines from tap water while also clearing cloudiness. Scour inner glass walls with a Wonder Shell to remove scum and to deter its return.

Sizing:
Small: Bowls up to 1 Gallon
Large: Tanks up to 5 Gallons
Super: Tanks 10-15 Gallons
Giant: Fish Ponds

Weco Wonder Shells are great for pH, calcium and water hardness control in small aquariums and fish bowls. These all-in-one treatments provide calcium carbonate, sodium thiosulfate, and necessary trace elements, including magnesium.

• Helps keep aquarium clear and maintains stable pH levels
• Adds necessary minerals while removing chlorine
• Great for goldfish, livebearers, cichlids and more

Weco Wonder Shells provide magnesium and calcium, which have been proven to help fish during stress and to prevent disease due to acid buildup in the body. These shells instantly remove chlorine and chloramines from tap water while also clearing cloudiness. Scour inner glass walls with a Wonder Shell to remove scum and to deter its return.

Sizing:
Small: Bowls up to 1 Gallon
Large: Tanks up to 5 Gallons
Super: Tanks 10-15 Gallons
Giant: Fish Ponds

Weco Wonder Shells are great for pH, calcium and water hardness control in small aquariums and fish bowls. These all-in-one treatments provide calcium carbonate, sodium thiosulfate, and necessary trace elements, including magnesium.

• Helps keep aquarium clear and maintains stable pH levels
• Adds necessary minerals while removing chlorine
• Great for goldfish, livebearers, cichlids and more

Weco Wonder Shells provide magnesium and calcium, which have been proven to help fish during stress and to prevent disease due to acid buildup in the body. These shells instantly remove chlorine and chloramines from tap water while also clearing cloudiness. Scour inner glass walls with a Wonder Shell to remove scum and to deter its return.

Sizing:
Small: Bowls up to 1 Gallon
Large: Tanks up to 5 Gallons
Super: Tanks 10-15 Gallons
Giant: Fish Ponds

Weco Wonder Shells are great for pH, calcium and water hardness control in small aquariums and fish bowls. These all-in-one treatments provide calcium carbonate, sodium thiosulfate, and necessary trace elements, including magnesium.

• Helps keep aquarium clear and maintains stable pH levels
• Adds necessary minerals while removing chlorine
• Great for goldfish, livebearers, cichlids and more

Weco Wonder Shells provide magnesium and calcium, which have been proven to help fish during stress and to prevent disease due to acid buildup in the body. These shells instantly remove chlorine and chloramines from tap water while also clearing cloudiness. Scour inner glass walls with a Wonder Shell to remove scum and to deter its return.

Sizing:
Small: Bowls up to 1 Gallon
Large: Tanks up to 5 Gallons
Super: Tanks 10-15 Gallons
Giant: Fish Ponds

Marina Betta Pure Water Conditioner makes tap water safe for your betta by removing harmful chlorine, chloramine and heavy metals found in tap water. Protects fish with a healthy slime coat. Use for new aquarium setups, when adding new water, or during fish transport.

• Immediately Removes Chlorine, Chloramines, and Heavy Metals
• Makes tap Water Safe for Your Betta
• Great for New Aquarium Setup, Water changes, and Fish Transport
• Contains Goji Berry

INSTRUCTIONS: Shake well before use. Add 10 drops to aquarium when adding water or during water changes (10 drops treats 1.5 gallons)

Nutrafin Betta Plus - Tap Water Conditioner makes tap water safe for bettas by neutralizing chlorine, chloramine and undesirable metals. Betta Plus protects fish scales and fins, reduces nitrite toxicity, and helps reduce stress. It also helps reduce inflammation and undesirable conditions that can arise from scrapes, torn fins, and abrasions. Betta Plus also contains tropical almond leaf extract, a natural element found in betta habitats, that conditions and supports a betta-friendly environment, allowing them to thrive and show their full-color potential.

• Makes Tap Water Safe for Bettas
• Protects Scales and Fins
• Contains Tropical Almond Leaf Extract
• Helps to Reduce Stress
• Helps Reduced Inflammation from Scrapes, Torn Fins and Abrasions

INSTRUCTIONS: Shake well before using. 5 mL (approx. 1 capful) treats 2 L (0.5 U.S. gal) with every water change.

Nutrafin Betta Plus - Tap Water Conditioner makes tap water safe for bettas by neutralizing chlorine, chloramine and undesirable metals. Betta Plus protects fish scales and fins, reduces nitrite toxicity, and helps reduce stress. It also helps reduce inflammation and undesirable conditions that can arise from scrapes, torn fins, and abrasions. Betta Plus also contains tropical almond leaf extract, a natural element found in betta habitats, that conditions and supports a betta-friendly environment, allowing them to thrive and show their full-color potential.

• Makes Tap Water Safe for Bettas
• Protects Scales and Fins
• Contains Tropical Almond Leaf Extract
• Helps to Reduce Stress
• Helps Reduced Inflammation from Scrapes, Torn Fins and Abrasions

INSTRUCTIONS: Shake well before using. 5 mL (approx. 1 capful) treats 2 L (0.5 U.S. gal) with every water change.

Nutrafin Betta Enviro-Clean 60 mL (2 fl oz), is a betta bowl cleaner that biologically breaks down waste in betta bowls and containers while promoting clean conditions that help reduce diseases.

• Biological Betta Bowl Cleaner
• Reduces Organic Waste in Betta Bowls
• Helps Reduce Disease
• Helps Reduce Stress

INSTRUCTIONS: Shake well before using 2.5 mL (approx. ? capful) treats 3.78 L (1 U.S. gal / 0.83 U.K. gal) with every water change

Nutrafin Goldfish Bowl Conditioner - Tap Water Conditioner for Goldfish instantly removes chlorine and chloramine from tap water. It also makes existing water in fish bowls safe by instantly binding and neutralizing toxic ammonia and detoxifying heavy metals.

• Goldfish Bowl Conditioner
• Instantly Removes Chlorine and Chloramine
• Neutralizes Toxic Ammonia
• Detoxifies Heavy Metals

INSTRUCTIONS: Shake well before using. Use with each water change 5mL (appox. 1/2 capful) treats 2 US gallons

Fluval Betta Plus Tap Water Conditioner makes tap water safe for bettas by neutralizing chlorine, chloramine and undesirable metals.

• Makes Tap Water Safe for Bettas
• Protects Scales and Fins
• Contains Herbal Extracts
• Helps Reduce Stress

INSTRUCTIONS: Shake well before using. 5 mL (approx. 1 capful) treats 2 L (0.5 U.S. gal) with every water change.

Betta Aquarium Cleaner helps reduce aquarium maintenance by actively digesting waste build up on gravel, power filters, decorations, and interior surfaces.

• Reduces organic waste in betta aquariums
• Formulated specifically for betta bowls
• Helps reduce aquarium maintenance
• Actively digests built up waste
• Works on gravel, power filters, decorations and other interior surfaces

Fluval Water Conditioner makes tap water safe by neutralizing chlorine, chloramine, and undesirable metals, which are toxic to fish. Formulated with pure herbal extracts, it also reduces fish stress and protects scales and fins from minor scrapes and cuts.

• All-natural conditioner neutralizes metal toxins, chlorine and chloramine found in tap water
• Herbal extracts reduce fish stress caused by transportation, handling, and acclimatization
• Coats delicate scales and fins to protect against minor abrasions
• Use when performing water changes, setting up a new tank, transporting fish, and healing wounds
• For use in freshwater and saltwater aquariums

Fluval Aquarium Water Conditioner offers total protection for tropical fish, neutralizing chlorine, chloramines and harmful metals to make tap water safe. Perfect for water changes, transporting fish and setting up new tanks.

• Makes tap water safe for tropical fish
• Neutralizes chlorine, chloramines and undesirable metals
• Pure herbal extracts reduce stress in fish
• Coats scales and fins to protect against scrapes and cuts

Fish stress can be caused by a variety of factors, including transportation, handling and acclimatization to a new environment. Stress can make fish more susceptible to a number of serious diseases and infections. Fluval Water Conditioner uses pure herbal extracts to minimize fish stress and help your pets live long and healthy lives.

Use for adding new water, water changes, new tank set-ups, fish transport, and cuts and wounds.

Instructions for Use: Shake well before using.

Directions:
Remove Chlorine: 5 ml treats 10 gallons
Remove Chloramine and Protect Scales and Fins: 10 ml treats 10 gallons

Dosage:
4 oz (120 ml): Treats up to 240 gallons
8.4 oz (250 ml): Treats up to 500 gallons
16.9 oz (500 ml): Treats up to 1000 gallons

Fluval Aquarium Water Conditioner offers total protection for tropical fish, neutralizing chlorine, chloramines and harmful metals to make tap water safe. Perfect for water changes, transporting fish and setting up new tanks.

• Makes tap water safe for tropical fish
• Neutralizes chlorine, chloramines and undesirable metals
• Pure herbal extracts reduce stress in fish
• Coats scales and fins to protect against scrapes and cuts

Fish stress can be caused by a variety of factors, including transportation, handling and acclimatization to a new environment. Stress can make fish more susceptible to a number of serious diseases and infections. Fluval Water Conditioner uses pure herbal extracts to minimize fish stress and help your pets live long and healthy lives.

Use for adding new water, water changes, new tank set-ups, fish transport, and cuts and wounds.

Instructions for Use: Shake well before using.

Directions:
Remove Chlorine: 5 ml treats 10 gallons
Remove Chloramine and Protect Scales and Fins: 10 ml treats 10 gallons

Dosage:
4 oz (120 ml): Treats up to 240 gallons
8.4 oz (250 ml): Treats up to 500 gallons
16.9 oz (500 ml): Treats up to 1000 gallons

Fluval Aquarium Water Conditioner offers total protection for tropical fish, neutralizing chlorine, chloramines and harmful metals to make tap water safe. Perfect for water changes, transporting fish and setting up new tanks.

• Makes tap water safe for tropical fish
• Neutralizes chlorine, chloramines and undesirable metals
• Pure herbal extracts reduce stress in fish
• Coats scales and fins to protect against scrapes and cuts

Fish stress can be caused by a variety of factors, including transportation, handling and acclimatization to a new environment. Stress can make fish more susceptible to a number of serious diseases and infections. Fluval Water Conditioner uses pure herbal extracts to minimize fish stress and help your pets live long and healthy lives.

Use for adding new water, water changes, new tank set-ups, fish transport, and cuts and wounds.

Instructions for Use: Shake well before using.

Directions:
Remove Chlorine: 5 ml treats 10 gallons
Remove Chloramine and Protect Scales and Fins: 10 ml treats 10 gallons

Dosage:
4 oz (120 ml): Treats up to 240 gallons
8.4 oz (250 ml): Treats up to 500 gallons
16.9 oz (500 ml): Treats up to 1000 gallons

Fluval Water Conditioner makes tapwater safe for tropical fish by neutralizing chlorine, chloramine and undesirable metals in aquarium water. Formulated with pure herbal extracts, it also visibly reduces stress in fish caused by transportation, handling and acclimatization. Fluval Water Conditioner also coats scales and fins to protect against scrapes and cuts.

• Reduces Stress for Fish
• Complete Tap Water Conditioner
• Improves Aquatic Environments for Tropical Fish
• 0.5 gallon (treats 4000 gallons)
• Removes Chlorine and Chloramines in Tapwater
• Coats and Protects Scales & Fins

Tetra AquaSafe Plus makes tap water safe for your aquarium fish while enhancing their natural protective slime coats. Its new advanced formula contains seaweed extracts (natural biopolymers) which support the development of beneficial filter bacteria for healthy and clear water.

• Water conditioner and dechlorinator for all fresh and marine aquariums
• Makes tap water safe for fish in seconds
• Enhances protective slime coat to help wounds heal and protect fish from abrasions

AquaSafe conditions tap water for the safety of your fish by neutralizing chlorine, chloramines and heavy metals. Use when adding new water to the tank and as monthly maintenance to preserve the protective slime coats of your fish.

Unique colloid ingredients in the formula have been designed to protect fishs delicate gills and membranes. These added ingredients help to reduce aquarium pollution by strengthening the bacterial bed.

Directions for Use: AquaSafe should be used when setting up a new aquarium and with every partial water change or evaporation replacement. Shake well before using. Add one teaspoon for every 10 gallons of water. Top of bottle cap can be used for measuring.

Key Ingredients: Sodium Hydroxymethane Sulfinate, Chelating Compounds, Polyvinyl Pyrollidones, Seaweed Biopolymers, Organic Hydrocolloids.

Note: May be used in fresh or saltwater. Switch off protein skimmer before use.

Tetra AquaSafe Plus makes tap water safe for your aquarium fish while enhancing their natural protective slime coats. Its new advanced formula contains seaweed extracts (natural biopolymers) which support the development of beneficial filter bacteria for healthy and clear water.

• Water conditioner and dechlorinator for all fresh and marine aquariums
• Makes tap water safe for fish in seconds
• Enhances protective slime coat to help wounds heal and protect fish from abrasions

AquaSafe conditions tap water for the safety of your fish by neutralizing chlorine, chloramines and heavy metals. Use when adding new water to the tank and as monthly maintenance to preserve the protective slime coats of your fish.

Unique colloid ingredients in the formula have been designed to protect fishs delicate gills and membranes. These added ingredients help to reduce aquarium pollution by strengthening the bacterial bed.

Directions for Use: AquaSafe should be used when setting up a new aquarium and with every partial water change or evaporation replacement. Shake well before using. Add one teaspoon for every 10 gallons of water. Top of bottle cap can be used for measuring.

Key Ingredients: Sodium Hydroxymethane Sulfinate, Chelating Compounds, Polyvinyl Pyrollidones, Seaweed Biopolymers, Organic Hydrocolloids.

Note: May be used in fresh or saltwater. Switch off protein skimmer before use.

Tetra AquaSafe is a fast-acting conditioner that neutralizes chlorine, chloramines, and heavy metals to make tap water safe for fish. In addition to dechlorinating, AquaSafe adds essential vitamins to new water and supports a healthy slime coat to help fish resist disease.

• Makes tap water safe for fish
• Neutralizes chlorine, chloramines and heavy metals
• Adds vitamins and helps restore protective slime coat
• For new tanks, water changes, monthly maintenance and fish transport

Tetra AquaSafe immediately neutralizes chlorine, chloramine, copper, zinc, and lead when added to tap water. A rich vitamin blend helps reduce fish stress and enhance long-term health, while additional biopolymers support the growth of beneficial bacteria in the filter, helping to keep your water clear and healthy.

Made in the USA.

Note: May be used in fresh or saltwater aquariums. Turn off protein skimmer before use.

Tetra AquaSafe Plus makes tap water safe for your aquarium fish while enhancing their natural protective slime coats. Its new advanced formula contains seaweed extracts (natural biopolymers) which support the development of beneficial filter bacteria for healthy and clear water.

• Water conditioner and dechlorinator for all fresh and marine aquariums
• Makes tap water safe for fish in seconds
• Enhances protective slime coat to help wounds heal and protect fish from abrasions

AquaSafe conditions tap water for the safety of your fish by neutralizing chlorine, chloramines and heavy metals. Use when adding new water to the tank and as monthly maintenance to preserve the protective slime coats of your fish.

Unique colloid ingredients in the formula have been designed to protect fishs delicate gills and membranes. These added ingredients help to reduce aquarium pollution by strengthening the bacterial bed.

Directions for Use: AquaSafe should be used when setting up a new aquarium and with every partial water change or evaporation replacement. Shake well before using. Add one teaspoon for every 10 gallons of water. Top of bottle cap can be used for measuring.

Key Ingredients: Sodium Hydroxymethane Sulfinate, Chelating Compounds, Polyvinyl Pyrollidones, Seaweed Biopolymers, Organic Hydrocolloids.

Note: May be used in fresh or saltwater. Switch off protein skimmer before use.

Tetra Pond AquaSafe Water Conditioner is essential for all pond keepers! Normal tap water contains chlorine, chloramines, and heavy metals that can harm pond fish. AquaSafe quickly eliminates these chemicals and neutralizes metals to make water safe for your pond fish.

• Makes tap water safe for pond fish and plants
• Removes harmful chlorine and chloramine
• Detoxifies heavy metals
• Protects fish with slime coating

Pond AquaSafe also provides a protective colloid coating for fish, which helps enhance immune resistance to diseases and bacteria. Safe for live plants and all pond fish.

Directions: Add 2 teaspoons (10 ml) for every 50 gallons of tap or well water you add to your pond or water feature. Use every time you add water to your pond.

Tetra AquaSafe Plus makes tap water safe for your aquarium fish while enhancing their natural protective slime coats. Its new advanced formula contains seaweed extracts (natural biopolymers) which support the development of beneficial filter bacteria for healthy and clear water.

• Water conditioner and dechlorinator for all fresh and marine aquariums
• Makes tap water safe for fish in seconds
• Enhances protective slime coat to help wounds heal and protect fish from abrasions

AquaSafe conditions tap water for the safety of your fish by neutralizing chlorine, chloramines and heavy metals. Use when adding new water to the tank and as monthly maintenance to preserve the protective slime coats of your fish.

Unique colloid ingredients in the formula have been designed to protect fishs delicate gills and membranes. These added ingredients help to reduce aquarium pollution by strengthening the bacterial bed.

Directions for Use: AquaSafe should be used when setting up a new aquarium and with every partial water change or evaporation replacement. Shake well before using. Add one teaspoon for every 10 gallons of water. Top of bottle cap can be used for measuring.

Key Ingredients: Sodium Hydroxymethane Sulfinate, Chelating Compounds, Polyvinyl Pyrollidones, Seaweed Biopolymers, Organic Hydrocolloids.

Note: May be used in fresh or saltwater. Switch off protein skimmer before use.

Tetra Pond AquaSafe Water Conditioner is essential for all pond keepers! Normal tap water contains chlorine, chloramines, and heavy metals that can harm pond fish. AquaSafe quickly eliminates these chemicals and neutralizes metals to make water safe for your pond fish.

• Makes tap water safe for pond fish and plants
• Removes harmful chlorine and chloramine
• Detoxifies heavy metals
• Protects fish with slime coating

Pond AquaSafe also provides a protective colloid coating for fish, which helps enhance immune resistance to diseases and bacteria. Safe for live plants and all pond fish.

Directions: Add 2 teaspoons (10 ml) for every 50 gallons of tap or well water you add to your pond or water feature. Use every time you add water to your pond.

Tetra BettaSafe conditions tap water safe for your Bettas by neutralizing chlorine and heavy metals present in municipal water supplies.

• Makes tap water safe for Bettas
• Complete formula, works in seconds
• Neutralizes chlorine and heavy metals

BettaSafe also neutralizes chloramines by breaking down the bond between chlorine and ammonia while reducing both fish toxic chlorine and ammonia components.

In addition, BettaSafe enhances the natural protective slime coating of Bettas to help wounds heal and protect fish from abrasions.

Tetra Water Clarifier works fast to clear hazy, cloudy water without affecting bio-filtration, pH or other water chemistry. The phosphate-free formula does not contribute to algae growth and is safe for use in soft-water conditions in all freshwater aquariums.

• Quickly clears cloudy and hazy aquarium water
• Safely settles minute particles
• Phosphate-free formula

Tetra Water Clarifier causes small particles to fall out of suspension, allowing them to be removed by normal power filtration or gravel cleaning.

Made in the USA.

Directions: Add 1 teaspoon of clarifier for every 10 gallons of aquarium water. Freshwater systems will begin to clear in several hours. Repeat as needed, allow 48 hours between doses.

Important: Safe for fish in very soft-water conditions. However, if in extremely low water conditions (below 1° kH), half doses are recommended. If in doubt about your waters condition, do a 20% water change prior to treatment. Be sure to use a water conditioner for each partial water change and water test kits to measure your waters hardness.

Tetra Water Clarifier works fast to clear hazy, cloudy water without affecting bio-filtration, pH or other water chemistry. The phosphate-free formula does not contribute to algae growth and is safe for use in soft-water conditions in all freshwater aquariums.

• Quickly clears cloudy and hazy aquarium water
• Safely settles minute particles
• Phosphate-free formula

Tetra Water Clarifier causes small particles to fall out of suspension, allowing them to be removed by normal power filtration or gravel cleaning.

Made in the USA.

Directions: Add 1 teaspoon of clarifier for every 10 gallons of aquarium water. Freshwater systems will begin to clear in several hours. Repeat as needed, allow 48 hours between doses.

Important: Safe for fish in very soft-water conditions. However, if in extremely low water conditions (below 1° kH), half doses are recommended. If in doubt about your waters condition, do a 20% water change prior to treatment. Be sure to use a water conditioner for each partial water change and water test kits to measure your waters hardness.

Tetra EasyBalance Plus provides an invaluable safety net for the time challenged hobbyist. It maintains healthy levels of essential aquarium chemistry, including regulating pH and alkalinity and reducing nitrates and phosphates. It further supports fish health by replenishing vital vitamins, minerals and electrolytes.

• Maintains healthy water and reduces water changes
• Regulates ideal pH and reduces nitrates
• For all freshwater aquariums

These white, biodegradable granules settle into the gravel where they nourish beneficial de-nitrifying bacteria that convert nitrate to harmless nitrogen gas. Nitraban adds further stability to aquariums by helping natural bacteria complete the nitrogen cycle. The water is kept biologically healthy for up to 6 months, extending time between water changes.

Additional Features:

• Carbonate hardness additive
• Carbon dioxide (CO2) production
• Trace element supplementation
• Vitamin B replenishment

Dosage:
1 teaspoon treats 5 gallons
3.38 oz treats 100 gallons
8.45 oz treats 250 gallons
16.9 oz treats 500 gallons

Tetra EasyBalance Plus provides an invaluable safety net for the time challenged hobbyist. It maintains healthy levels of essential aquarium chemistry, including regulating pH and alkalinity and reducing nitrates and phosphates. It further supports fish health by replenishing vital vitamins, minerals and electrolytes.

• Maintains healthy water and reduces water changes
• Regulates ideal pH and reduces nitrates
• For all freshwater aquariums

These white, biodegradable granules settle into the gravel where they nourish beneficial de-nitrifying bacteria that convert nitrate to harmless nitrogen gas. Nitraban adds further stability to aquariums by helping natural bacteria complete the nitrogen cycle. The water is kept biologically healthy for up to 6 months, extending time between water changes.

Additional Features:

• Carbonate hardness additive
• Carbon dioxide (CO2) production
• Trace element supplementation
• Vitamin B replenishment

Dosage:
1 teaspoon treats 5 gallons
3.38 oz treats 100 gallons
8.45 oz treats 250 gallons
16.9 oz treats 500 gallons

Tetra EasyBalance Plus provides an invaluable safety net for the time challenged hobbyist. It maintains healthy levels of essential aquarium chemistry, including regulating pH and alkalinity and reducing nitrates and phosphates. It further supports fish health by replenishing vital vitamins, minerals and electrolytes.

• Maintains healthy water and reduces water changes
• Regulates ideal pH and reduces nitrates
• For all freshwater aquariums

These white, biodegradable granules settle into the gravel where they nourish beneficial de-nitrifying bacteria that convert nitrate to harmless nitrogen gas. Nitraban adds further stability to aquariums by helping natural bacteria complete the nitrogen cycle. The water is kept biologically healthy for up to 6 months, extending time between water changes.

Additional Features:

• Carbonate hardness additive
• Carbon dioxide (CO2) production
• Trace element supplementation
• Vitamin B replenishment

Dosage:
1 teaspoon treats 5 gallons
3.38 oz treats 100 gallons
8.45 oz treats 250 gallons
16.9 oz treats 500 gallons

Tetra Correct pH 7.0 fizz tabs maintain a neutral pH to reduce fish stress and prevent water from becoming too acidic or basic in community aquariums. These easy-to-use tablets hold the proper pH for several weeks and are safe to use in all freshwater aquariums.

• Maintains neutral pH in community aquariums
• Reduces fish stress due to changes in pH
• Holds proper pH for several weeks

Maintaining healthy pH levels in your fish tank is crucial for the wellbeing of all aquatic pets and plants. pH fluctuations can increase stress and make fish more susceptible to harmful diseases and infections. Use Correct pH as a regular maintenance solution or as needed to maintain a health pH level.

Made in the USA.

Directions: Add 1 tablet to each 10 gallons (40L) of aquarium water. Use Tetra test strips to determine the pH level and treat as necessary, taking care not to change the pH level more than 0.5 degrees in a 24-hour period.

Note: For aquariums 40 gallons or larger, and for soft water and/or acid water with low alkalinity, dissolve tablets before adding to aquarium. Hard and/or alkaline water may require a softener.

Tetra SafeStart Aquarium Bacteria and Conditioner reduces toxic ammonia and nitrite, adds live bacteria to promote biological filtration and prevents "new tank syndrome" from affecting fish in your tank. It works quickly to allow the immediate addition of fish in new tanks.

• Allows immediate addition of fish
• Reduces ammonia and nitrite
• Prevents new tank syndrome
• Safe for all freshwater aquariums
• Accelerates establishment of the bio-filter

This patented mix of proprietary Bio-Spira bacteria is proven to work. Use SafeStart when setting up new tanks, after a water change, when adding fish or after medicating. The formula is shelf-stable and requires no refrigeration.

Dosage:
1.69 oz (50 ml) treats up to 15 gallons
3.38 oz (100 ml) treats up to 30 gallons

Tetra SafeStart Aquarium Bacteria and Conditioner reduces toxic ammonia and nitrite, adds live bacteria to promote biological filtration and prevents "new tank syndrome" from affecting fish in your tank. It works quickly to allow the immediate addition of fish in new tanks.

• Allows immediate addition of fish
• Reduces ammonia and nitrite
• Prevents new tank syndrome
• Safe for all freshwater aquariums
• Accelerates establishment of the bio-filter

This patented mix of proprietary Bio-Spira bacteria is proven to work. Use SafeStart when setting up new tanks, after a water change, when adding fish or after medicating. The formula is shelf-stable and requires no refrigeration.

Dosage:
1.69 oz (50 ml) treats up to 15 gallons
3.38 oz (100 ml) treats up to 30 gallons

The Zoo Med Betta H2O conditioner instantly conditions your pets water to make it safe from harmful choloromines, chlorine, nitrite and heavy metals. Promote good health and instantly condition your water with the Betta H2O water conditioner!

• Relieves stress
• Promotes healing
• Betta water conditioner works instantly

Zoo Med AquaPure Instant Water Conditioner makes tap water safe for fish in fresh and saltwater tanks. AquaPure instantly removes harmful chlorine and chloramines, and eliminates and prevents the re-accumulation of toxic ammonia. In addition, AquaPure stimulates natural slime coat development and stabilizes water pH.

• Water conditioner for fresh and saltwater aquariums and paludariums
• Instantly removes chlorine and chloramines
• Removes ammonia and helps prevent future build-up
• Stimulates fish slime coat development to reduce risk of infection
• Stabilizes water pH

Directions: Use when adding new tap water or performing a water change.

Ingredients: Water, Dechloraminating Agent, Synthetic Organic Polymers (Colloids), Chelating Agent.

Jungle Start Right with Aloe Vera naturally conditions tap water to be safe for fish by removing chlorine and chloramine, neutralizing heavy metals, adding electrolytes, and supporting the production of a healthy slime coat. Start Right may be used for new tanks or monthly maintenance in fresh or saltwater aquariums.

• Conditions tap water
• Removes chlorine and neutralizes heavy metals
• Adds slime coat to protect against infection

Start Right provides additional benefits to your fish and aquarium over other conditioners, including aiding in cell regeneration and protecting against secondary infections. It leaves aquariums clean and clear, with no deposits or residue on plants and equipment. Use on start-up or for monthly maintenance.

Directions: To remove chlorine and chloramine: Use 1 teaspoon or 1 capful (5 mL) to 10 gallons (40 L) in all new water. To help repair damaged skin and fins: Use 2 teaspoons or 2 capfuls (10 mL) to 10 gallons (40 L) of aquarium water.

Active Ingredients: Sodium Chloride, Aloe Vera, Polyvinylpyrrolidone.

Kordon Pond NovAqua creates a protective slime coating on a fishs body when the natural slime has been removed due to injury, disease or rough handling. In addition, it adds electrolytes for proper water balance, removes chlorine, copper, hard metals and toxins, and helps stabilize the pH of tap water, making it safe for your pond fish.

• Adds superior protective skin slime-coat
• Adds essential electrolytes
• Detoxifies chlorine, chloramine and toxic metals making tap water safe for fish
• Made in the USA

16 oz Treats 960 Gallons
1 Gallon Treats 7,680 Gallons

The slime coating acts like an invisible bandage on and in your fishes' skin, providing a barrier against serious loss of internal fluids and electrolytes and protects damaged areas of the body against external toxins and disease-causing organisms.

Kordon NovAqua aids in concentrating certain drugs and antibacterials at the diseased or damaged site. NovAqua detoxifies heavy metals and is capable of eliminating free copper ions from solution.

A single dose of Pond NovAqua will detoxify up to 3.75 ppm total chlorine, detoxify copper (up to 1.0 ppm) and reduce or eliminate all other heavy metals in the water. Add electrolytes to ease stress in your fish, such as during acclimation and illness. Increase dosage to remove excess amounts of heavy metals or chlorine.

Directions for Use: SHAKE BOTTLE WELL BEFORE USING. To condition water for all aquatic life, shake the bottle before using and add 1-2/3 fl. oz per 100 gallons of water, or 1 capful per 8 gallons (use the cap on this container for measuring capfuls). Dosage can be increased or repeated without adverse effects. Pond NovAqua does not interfere with fishes' gills or breathing, or the measurements of water quality test kits. If water is suspected of containing chloramines (a chemical complex of chlorine and ammonia) or ammonia, add Kordons Pond AmQuel - a single-step, fast action ammonia/chloramines remover. For fishes with bruises, missing scales, or frayed fins use Kordons Fish Protector as a healing aid.

Non-toxic to humans, pets and aquatic life. For ornamental pond and aquarium fish use only. Not for human, medical or food fish use.