Water Conditioners

Sort By:  
Nutrafin Goldfish Bowl Tap Water Conditioner  - 2 oz
Nutrafin Goldfish Bowl Tap Water Conditioner - 2 oz ('15561179584)

Nutrafin Goldfish Bowl Conditioner - Tap Water Conditioner for Goldfish instantly removes chlorine and chloramine from tap water. It also makes existing water in fish bowls safe by instantly binding and neutralizing toxic ammonia and detoxifying heavy metals.

  • Goldfish Bowl Conditioner
  • Instantly Removes Chlorine and Chloramine
  • Neutralizes Toxic Ammonia
  • Detoxifies Heavy Metals

INSTRUCTIONS: Shake well before using. Use with each water change 5mL (appox. 1/2 capful) treats 2 US gallons

Nutrafin Goldfish Bowl Tap Water Conditioner
$3.50
Seachem Purigen Ultimate Filtration Powder - 34 oz
Seachem Purigen Ultimate Filtration Powder - 34 oz ('116016704)

Seachem Purigen Ultimate Filtration is a premium synthetic adsorbent that, unlike any other filtration product, is not a mixture of ion exchangers or adsorbents, but a unique macro-porous synthetic polymer that removes soluble and insoluble impurities from water at a rate and capacity that exceeds all others by over 500%.

  • Removes soluble and insoluble impurities from water
  • Controls ammonia, nitrites, nitrates
  • Polishes water to unparalleled clarity

Purigen controls ammonia, nitrites and nitrates by removing nitrogenous organic waste that would otherwise release these harmful compounds. Purigens impact on trace elements is minimal. It significantly raises redox. It polishes water to unparalleled clarity. Purigen darkens progressively as it exhausts, and is easily renewed by treating with bleach. Purigen is designed for both marine and freshwater use.

Why Its Different:

  • Selectivity: Purigen is the highest capacity organic filtration resin on the market. No other products can compare to its ability to clear haziness and polish water to unparalleled clarity. Unlike other products on the market which are simple ion-exchange resins, Purigen is specifically designed to be an organic scavenging resin. When ion-exchange resins are filled to capacity by metals and other contaminants, Purigen has barely begun to reach its potential. Purigen generally ignores simple elemental compounds, having an extreme affinity for nitrogenous organics. The primary source of nitrogenous compounds in an aquarium is waste. Fish, corals, even plants produce nitrogenous waste. Purigen removes that waste faster and more completely than anything else on the market.
  • Capacity: Purigens possesses enhanced capacity owing to its vast surface area. All other resins on the market are purely spherical extruded beads. These beads remain smooth even under a microscope. Purigen is both spherical and macroreticular. It has microscopic pores that increase its usable surface area to many times that of a purely spherical resin.
  • Regeneration: Purigen can also be regenerated. As it adsorbs waste products, Purigen will change color from a pale blonde to a dark brown, almost black. Once it is exhausted, it can be regenerated with a solution of bleach and water. The bleach will literally “burn off" the organics that have been removed from the tank. Watch out for products that claim to be regenerable with a brine solution. That is the regeneration procedure for ion-exchange purposes. A brine solution will not remove organics. While such resins have a limited capacity for organic adsorption, a brine regeneration process only replaces removed ionic compounds. It does not destroy large organic molecules that were removed, which is the primary function of organic adsorption resins.

Directions:
Rinse before use. Use in a fine mesh filter bag. Each 1 L treats up to 4,000 L (1,000 gallons) for up to six months. Exhaustion is indicated by a pronounced discoloration of the beads to dark brown or black.

Regeneration: Soak in a 1:1 bleach:water solution for 24 hours in a non-metalic container in a well ventilated area and away from children. Rinse well, then soak for 8 hours with a solution containing 2 tablespoons of ChlorGuard, Prime, or equivalent dechlorinator per cup of water. Rinse well. Original color and full activity should now be restored and Purigen is ready for reuse. Caution: some slime coat products may permanently foul Purigen and render regeneration difficult. Do not reuse if odor of chlorine is detectable. In case of doubt, soak beads in small quantity of water and test for residual chlorine with a chlorine test kit.

Dosage:
100 ml (Media Bag): Treats 106 Gallons
250 ml: Treats 265 Gallons
500 ml: Treats 530 Gallons
1 Liter: Treats 1,060 Gallons
2 Liters: Treats 2,120 Gallons

Seachem Purigen Ultimate Filtration Powder
$71.20
Seachem Purigen Ultimate Filtration Powder - 68 oz
Seachem Purigen Ultimate Filtration Powder - 68 oz ('116016803)

Seachem Purigen Ultimate Filtration is a premium synthetic adsorbent that, unlike any other filtration product, is not a mixture of ion exchangers or adsorbents, but a unique macro-porous synthetic polymer that removes soluble and insoluble impurities from water at a rate and capacity that exceeds all others by over 500%.

  • Removes soluble and insoluble impurities from water
  • Controls ammonia, nitrites, nitrates
  • Polishes water to unparalleled clarity

Purigen controls ammonia, nitrites and nitrates by removing nitrogenous organic waste that would otherwise release these harmful compounds. Purigens impact on trace elements is minimal. It significantly raises redox. It polishes water to unparalleled clarity. Purigen darkens progressively as it exhausts, and is easily renewed by treating with bleach. Purigen is designed for both marine and freshwater use.

Why Its Different:

  • Selectivity: Purigen is the highest capacity organic filtration resin on the market. No other products can compare to its ability to clear haziness and polish water to unparalleled clarity. Unlike other products on the market which are simple ion-exchange resins, Purigen is specifically designed to be an organic scavenging resin. When ion-exchange resins are filled to capacity by metals and other contaminants, Purigen has barely begun to reach its potential. Purigen generally ignores simple elemental compounds, having an extreme affinity for nitrogenous organics. The primary source of nitrogenous compounds in an aquarium is waste. Fish, corals, even plants produce nitrogenous waste. Purigen removes that waste faster and more completely than anything else on the market.
  • Capacity: Purigens possesses enhanced capacity owing to its vast surface area. All other resins on the market are purely spherical extruded beads. These beads remain smooth even under a microscope. Purigen is both spherical and macroreticular. It has microscopic pores that increase its usable surface area to many times that of a purely spherical resin.
  • Regeneration: Purigen can also be regenerated. As it adsorbs waste products, Purigen will change color from a pale blonde to a dark brown, almost black. Once it is exhausted, it can be regenerated with a solution of bleach and water. The bleach will literally “burn off" the organics that have been removed from the tank. Watch out for products that claim to be regenerable with a brine solution. That is the regeneration procedure for ion-exchange purposes. A brine solution will not remove organics. While such resins have a limited capacity for organic adsorption, a brine regeneration process only replaces removed ionic compounds. It does not destroy large organic molecules that were removed, which is the primary function of organic adsorption resins.

Directions:
Rinse before use. Use in a fine mesh filter bag. Each 1 L treats up to 4,000 L (1,000 gallons) for up to six months. Exhaustion is indicated by a pronounced discoloration of the beads to dark brown or black.

Regeneration: Soak in a 1:1 bleach:water solution for 24 hours in a non-metalic container in a well ventilated area and away from children. Rinse well, then soak for 8 hours with a solution containing 2 tablespoons of ChlorGuard, Prime, or equivalent dechlorinator per cup of water. Rinse well. Original color and full activity should now be restored and Purigen is ready for reuse. Caution: some slime coat products may permanently foul Purigen and render regeneration difficult. Do not reuse if odor of chlorine is detectable. In case of doubt, soak beads in small quantity of water and test for residual chlorine with a chlorine test kit.

Dosage:
100 ml (Media Bag): Treats 106 Gallons
250 ml: Treats 265 Gallons
500 ml: Treats 530 Gallons
1 Liter: Treats 1,060 Gallons
2 Liters: Treats 2,120 Gallons

Seachem Purigen Ultimate Filtration Powder
$122.68
Seachem Garlic Guard Garlic Additive - 17 oz
Seachem Garlic Guard Garlic Additive - 17 oz ('116017305)

Seachem Garlic Guard is an appetite and flavor enhancer for freshwater and saltwater fish. Garlic Guard contains allicin (the naturally derived, active ingredient found in garlic), which has been demonstrated to possess health-promoting benefits, and will help renew the interest of poor or finicky eaters.

  • Garlic additive and flavor enhancer
  • Renews interest of poor or finicky eaters
  • Suitable for fresh or saltwater; reef and plant safe

Allicin possesses strong antioxidant properties (similar to Vitamin C) which promote enhanced health through elimination of free radicals. For enhanced health benefits, Seachem Garlic Guard also contains Vitamin C. Safe for freshwater, marine and reef aquariums.

Directions for Use: Shake well before use. Soak food in Garlic Guard before feeding.

Guaranteed Analysis:
Garlic Extract - 9900 ppm
Allicin (active ingredient) - 130 ppm
Vitamin C - 1000 ppm

Seachem Garlic Guard Garlic Additive
$23.26
Seachem Garlic Guard Garlic Additive - 3.4 oz
Seachem Garlic Guard Garlic Additive - 3.4 oz ('116017503)

Seachem Garlic Guard is an appetite and flavor enhancer for freshwater and saltwater fish. Garlic Guard contains allicin (the naturally derived, active ingredient found in garlic), which has been demonstrated to possess health-promoting benefits, and will help renew the interest of poor or finicky eaters.

  • Garlic additive and flavor enhancer
  • Renews interest of poor or finicky eaters
  • Suitable for fresh or saltwater; reef and plant safe

Allicin possesses strong antioxidant properties (similar to Vitamin C) which promote enhanced health through elimination of free radicals. For enhanced health benefits, Seachem Garlic Guard also contains Vitamin C. Safe for freshwater, marine and reef aquariums.

Directions for Use: Shake well before use. Soak food in Garlic Guard before feeding.

Guaranteed Analysis:
Garlic Extract - 9900 ppm
Allicin (active ingredient) - 130 ppm
Vitamin C - 1000 ppm

Seachem Garlic Guard Garlic Additive
$5.02
Seachem Garlic Guard Garlic Additive - 8.5 oz
Seachem Garlic Guard Garlic Additive - 8.5 oz ('116017602)

Seachem Garlic Guard is an appetite and flavor enhancer for freshwater and saltwater fish. Garlic Guard contains allicin (the naturally derived, active ingredient found in garlic), which has been demonstrated to possess health-promoting benefits, and will help renew the interest of poor or finicky eaters.

  • Garlic additive and flavor enhancer
  • Renews interest of poor or finicky eaters
  • Suitable for fresh or saltwater; reef and plant safe

Allicin possesses strong antioxidant properties (similar to Vitamin C) which promote enhanced health through elimination of free radicals. For enhanced health benefits, Seachem Garlic Guard also contains Vitamin C. Safe for freshwater, marine and reef aquariums.

Directions for Use: Shake well before use. Soak food in Garlic Guard before feeding.

Guaranteed Analysis:
Garlic Extract - 9900 ppm
Allicin (active ingredient) - 130 ppm
Vitamin C - 1000 ppm

Seachem Garlic Guard Garlic Additive
$9.94
Seachem PhosGuard Phosphate/Silicate Control - 17 oz
Seachem PhosGuard Phosphate/Silicate Control - 17 oz ('116018302)

SeaChem PhosGuard rapidly removes phosphate and silicate from marine and freshwater aquaria. It is not recommended for phosphate buffered freshwater. SeaChem PhosGuard is highly porous for high capacity and bead-shaped for optimum water flow.

  • Removes phosphate and silicate from fresh and saltwater systems
  • Highly porous and bean-shaped for maximum absorption and water flow
  • Causes a decline in hair algae and enhanced coral growth

SeaChem Phosguard outperforms all competing products. PhosGuard is a high capacity and high efficiency filtration product for removing phosphates and silicates from marine or fresh water aquaria. Unlike competing products, PhosGuard is bead-shaped for optimum flow characteristics and has an exceptional porosity for enhanced capacity. PhosGuard has a working capacity to remove 20 to 60 mg/l phosphate in 100 gallons with a similar impact on silicates. It may be used continuously or intermittently, and will not release removed phosphate. PhosGuard will cause a decline in hair algae and enhance coral growth. Each liter treats up to 300 gallons. Marine or freshwater use.

Instructions: Use 1 cup for every 75 gallons. Leave product in place for 4 days, then test phosphate and silicate.

Seachem PhosGuard Phosphate/Silicate Control
$24.34
Seachem PhosGuard Phosphate/Silicate Control - 100 mL
Seachem PhosGuard Phosphate/Silicate Control - 100 mL ('116018500)

SeaChem PhosGuard rapidly removes phosphate and silicate from marine and freshwater aquaria. It is not recommended for phosphate buffered freshwater. SeaChem PhosGuard is highly porous for high capacity and bead-shaped for optimum water flow.

  • Removes phosphate and silicate from fresh and saltwater systems
  • Highly porous and bean-shaped for maximum absorption and water flow
  • Causes a decline in hair algae and enhanced coral growth

SeaChem Phosguard outperforms all competing products. PhosGuard is a high capacity and high efficiency filtration product for removing phosphates and silicates from marine or fresh water aquaria. Unlike competing products, PhosGuard is bead-shaped for optimum flow characteristics and has an exceptional porosity for enhanced capacity. PhosGuard has a working capacity to remove 20 to 60 mg/l phosphate in 100 gallons with a similar impact on silicates. It may be used continuously or intermittently, and will not release removed phosphate. PhosGuard will cause a decline in hair algae and enhance coral growth. Each liter treats up to 300 gallons. Marine or freshwater use.

Instructions: Use 1 cup for every 75 gallons. Leave product in place for 4 days, then test phosphate and silicate.

Seachem PhosGuard Phosphate/Silicate Control
$7.32
Seachem PhosGuard Phosphate/Silicate Control - 8.5 oz
Seachem PhosGuard Phosphate/Silicate Control - 8.5 oz ('116018609)

SeaChem PhosGuard rapidly removes phosphate and silicate from marine and freshwater aquaria. It is not recommended for phosphate buffered freshwater. SeaChem PhosGuard is highly porous for high capacity and bead-shaped for optimum water flow.

  • Removes phosphate and silicate from fresh and saltwater systems
  • Highly porous and bean-shaped for maximum absorption and water flow
  • Causes a decline in hair algae and enhanced coral growth

SeaChem Phosguard outperforms all competing products. PhosGuard is a high capacity and high efficiency filtration product for removing phosphates and silicates from marine or fresh water aquaria. Unlike competing products, PhosGuard is bead-shaped for optimum flow characteristics and has an exceptional porosity for enhanced capacity. PhosGuard has a working capacity to remove 20 to 60 mg/l phosphate in 100 gallons with a similar impact on silicates. It may be used continuously or intermittently, and will not release removed phosphate. PhosGuard will cause a decline in hair algae and enhance coral growth. Each liter treats up to 300 gallons. Marine or freshwater use.

Instructions: Use 1 cup for every 75 gallons. Leave product in place for 4 days, then test phosphate and silicate.

Seachem PhosGuard Phosphate/Silicate Control
$9.64
Seachem PhosGuard Phosphate/Silicate Control - 34 oz
Seachem PhosGuard Phosphate/Silicate Control - 34 oz ('116018708)

SeaChem PhosGuard rapidly removes phosphate and silicate from marine and freshwater aquaria. It is not recommended for phosphate buffered freshwater. SeaChem PhosGuard is highly porous for high capacity and bead-shaped for optimum water flow.

  • Removes phosphate and silicate from fresh and saltwater systems
  • Highly porous and bean-shaped for maximum absorption and water flow
  • Causes a decline in hair algae and enhanced coral growth

SeaChem Phosguard outperforms all competing products. PhosGuard is a high capacity and high efficiency filtration product for removing phosphates and silicates from marine or fresh water aquaria. Unlike competing products, PhosGuard is bead-shaped for optimum flow characteristics and has an exceptional porosity for enhanced capacity. PhosGuard has a working capacity to remove 20 to 60 mg/l phosphate in 100 gallons with a similar impact on silicates. It may be used continuously or intermittently, and will not release removed phosphate. PhosGuard will cause a decline in hair algae and enhance coral growth. Each liter treats up to 300 gallons. Marine or freshwater use.

Instructions: Use 1 cup for every 75 gallons. Leave product in place for 4 days, then test phosphate and silicate.

Seachem PhosGuard Phosphate/Silicate Control
$33.42
Seachem PhosGuard Phosphate/Silicate Control - 68 oz
Seachem PhosGuard Phosphate/Silicate Control - 68 oz ('116018807)

SeaChem PhosGuard rapidly removes phosphate and silicate from marine and freshwater aquaria. It is not recommended for phosphate buffered freshwater. SeaChem PhosGuard is highly porous for high capacity and bead-shaped for optimum water flow.

  • Removes phosphate and silicate from fresh and saltwater systems
  • Highly porous and bean-shaped for maximum absorption and water flow
  • Causes a decline in hair algae and enhanced coral growth

SeaChem Phosguard outperforms all competing products. PhosGuard is a high capacity and high efficiency filtration product for removing phosphates and silicates from marine or fresh water aquaria. Unlike competing products, PhosGuard is bead-shaped for optimum flow characteristics and has an exceptional porosity for enhanced capacity. PhosGuard has a working capacity to remove 20 to 60 mg/l phosphate in 100 gallons with a similar impact on silicates. It may be used continuously or intermittently, and will not release removed phosphate. PhosGuard will cause a decline in hair algae and enhance coral growth. Each liter treats up to 300 gallons. Marine or freshwater use.

Instructions: Use 1 cup for every 75 gallons. Leave product in place for 4 days, then test phosphate and silicate.

Seachem PhosGuard Phosphate/Silicate Control
$52.16
Seachem Brackish Salt for Aquariums - 10.6 oz
Seachem Brackish Salt for Aquariums - 10.6 oz ('116022606)

Seachem live bearer/brackish aquarium salt is a chemically sound blend of salts designed to replicate the native environment of live bearers and other brackish estuary fish without adversely impacting on aquatic plants when used at regionally specific recommended dosage. The salt is also well suited for routine aquarium freshwater use. It does not impact pH or provide buffering. For low range pH control Use Acid buffer, discus buffer, South American Cichlid buffer 4. 5, or Acid regulator. Use neutral regulator, Central American Cichlid buffer or South American Cichlid buffer 7. 0 for neutral pH. For high range pH control Use alkaline regulator, alkaline buffer or Tanganyika buffer.

  • A chemically sound blend of salts designed to replicate native environment of live bearers and other brackish estuary fish
  • Designed to function without adversely impacting on aquatic plants when used at regionally specific recommended dosage
  • Well suited for routine Aquarium freshwater dosage
  • Does not impact pH or provide buffering
  • <
Seachem Brackish Salt for Aquariums
$7.06
Seachem Alkaline Buffer - 600 Grams (1.3 lbs)
Seachem Alkaline Buffer - 600 Grams (1.3 lbs) ('116023306)

Seachem Alkaline Buffer raises the pH and alkalinity (KH) of your aquarium water and holds it steady between 7.2 and 8.5 - an ideal range for most freshwater environments. Alkaline Buffer is safe, gentle, and phosphate-free to reduce the risk of algae or cloudiness.

  • Raises pH and increases alkalinity
  • Buffers pH between 7.2 and 8.5
  • Great for planted aquariums or very hard water

Seachem Alkaline Buffer is a sodium bicarbonate-based buffer. This makes it slightly less stable than phosphate buffers, but better suited for planted aquariums where adding more phosphates would lead to an algae problem.

Dosage:
300 grams (10.5 oz): Treats 860 Gallons
600 grams (1.3 lbs): Treats 1,720 Gallons
1.2 kg (2.6 lbs): Treats 3,440 Gallons
4 kg (8.8 lbs): Treats 11,640 Gallons

Directions: To increase pH, use 1 teaspoon (7g) for every 80 L (20 gallons) daily until the desired pH is reached (this dose raises alkalinity by about 1 meq/L (2.8 dKH)). For precise dosing, use the Seachem Digital Spoon Scale. In order to adjust pH gradually, use Alkaline Buffer with Acid Buffer.

FAQ:

  • Q: What is the difference between Neutral Regulator, Discus Buffer, Alkaline Buffer, and Acid Buffer
    A: Neutral Regulator and Discus Buffer are phosphate-based buffers providing a very strong and stable buffering system. Alkaline Buffer and Acid Buffer are non-phosphate buffers, which although less stable than a phosphate buffer, are ideal for the planted aquarium where high phosphate levels would lead to an algae problem.
  • Q: Is Alkaline Buffer a sodium bicarbonate
    A: Yes, it is a sodium bicarbonate-based buffer.
Seachem Alkaline Buffer
$25.44
Seachem Alkaline Buffer - 250 Grams (10.5 oz)
Seachem Alkaline Buffer - 250 Grams (10.5 oz) ('116023603)

Seachem Alkaline Buffer raises the pH and alkalinity (KH) of your aquarium water and holds it steady between 7.2 and 8.5 - an ideal range for most freshwater environments. Alkaline Buffer is safe, gentle, and phosphate-free to reduce the risk of algae or cloudiness.

  • Raises pH and increases alkalinity
  • Buffers pH between 7.2 and 8.5
  • Great for planted aquariums or very hard water

Seachem Alkaline Buffer is a sodium bicarbonate-based buffer. This makes it slightly less stable than phosphate buffers, but better suited for planted aquariums where adding more phosphates would lead to an algae problem.

Dosage:
300 grams (10.5 oz): Treats 860 Gallons
600 grams (1.3 lbs): Treats 1,720 Gallons
1.2 kg (2.6 lbs): Treats 3,440 Gallons
4 kg (8.8 lbs): Treats 11,640 Gallons

Directions: To increase pH, use 1 teaspoon (7g) for every 80 L (20 gallons) daily until the desired pH is reached (this dose raises alkalinity by about 1 meq/L (2.8 dKH)). For precise dosing, use the Seachem Digital Spoon Scale. In order to adjust pH gradually, use Alkaline Buffer with Acid Buffer.

FAQ:

  • Q: What is the difference between Neutral Regulator, Discus Buffer, Alkaline Buffer, and Acid Buffer
    A: Neutral Regulator and Discus Buffer are phosphate-based buffers providing a very strong and stable buffering system. Alkaline Buffer and Acid Buffer are non-phosphate buffers, which although less stable than a phosphate buffer, are ideal for the planted aquarium where high phosphate levels would lead to an algae problem.
  • Q: Is Alkaline Buffer a sodium bicarbonate
    A: Yes, it is a sodium bicarbonate-based buffer.
Seachem Alkaline Buffer
$19.16
Seachem Alkaline Buffer - 1,200 Grams (2.6 lbs)
Seachem Alkaline Buffer - 1,200 Grams (2.6 lbs) ('116023702)

Seachem Alkaline Buffer raises the pH and alkalinity (KH) of your aquarium water and holds it steady between 7.2 and 8.5 - an ideal range for most freshwater environments. Alkaline Buffer is safe, gentle, and phosphate-free to reduce the risk of algae or cloudiness.

  • Raises pH and increases alkalinity
  • Buffers pH between 7.2 and 8.5
  • Great for planted aquariums or very hard water

Seachem Alkaline Buffer is a sodium bicarbonate-based buffer. This makes it slightly less stable than phosphate buffers, but better suited for planted aquariums where adding more phosphates would lead to an algae problem.

Dosage:
300 grams (10.5 oz): Treats 860 Gallons
600 grams (1.3 lbs): Treats 1,720 Gallons
1.2 kg (2.6 lbs): Treats 3,440 Gallons
4 kg (8.8 lbs): Treats 11,640 Gallons

Directions: To increase pH, use 1 teaspoon (7g) for every 80 L (20 gallons) daily until the desired pH is reached (this dose raises alkalinity by about 1 meq/L (2.8 dKH)). For precise dosing, use the Seachem Digital Spoon Scale. In order to adjust pH gradually, use Alkaline Buffer with Acid Buffer.

FAQ:

  • Q: What is the difference between Neutral Regulator, Discus Buffer, Alkaline Buffer, and Acid Buffer
    A: Neutral Regulator and Discus Buffer are phosphate-based buffers providing a very strong and stable buffering system. Alkaline Buffer and Acid Buffer are non-phosphate buffers, which although less stable than a phosphate buffer, are ideal for the planted aquarium where high phosphate levels would lead to an algae problem.
  • Q: Is Alkaline Buffer a sodium bicarbonate
    A: Yes, it is a sodium bicarbonate-based buffer.
Seachem Alkaline Buffer
$39.40
Seachem Alkaline Buffer - 4 kg (8.8 lbs)
Seachem Alkaline Buffer - 4 kg (8.8 lbs) ('116023900)

Seachem Alkaline Buffer raises the pH and alkalinity (KH) of your aquarium water and holds it steady between 7.2 and 8.5 - an ideal range for most freshwater environments. Alkaline Buffer is safe, gentle, and phosphate-free to reduce the risk of algae or cloudiness.

  • Raises pH and increases alkalinity
  • Buffers pH between 7.2 and 8.5
  • Great for planted aquariums or very hard water

Seachem Alkaline Buffer is a sodium bicarbonate-based buffer. This makes it slightly less stable than phosphate buffers, but better suited for planted aquariums where adding more phosphates would lead to an algae problem.

Dosage:
300 grams (10.5 oz): Treats 860 Gallons
600 grams (1.3 lbs): Treats 1,720 Gallons
1.2 kg (2.6 lbs): Treats 3,440 Gallons
4 kg (8.8 lbs): Treats 11,640 Gallons

Directions: To increase pH, use 1 teaspoon (7g) for every 80 L (20 gallons) daily until the desired pH is reached (this dose raises alkalinity by about 1 meq/L (2.8 dKH)). For precise dosing, use the Seachem Digital Spoon Scale. In order to adjust pH gradually, use Alkaline Buffer with Acid Buffer.

FAQ:

  • Q: What is the difference between Neutral Regulator, Discus Buffer, Alkaline Buffer, and Acid Buffer
    A: Neutral Regulator and Discus Buffer are phosphate-based buffers providing a very strong and stable buffering system. Alkaline Buffer and Acid Buffer are non-phosphate buffers, which although less stable than a phosphate buffer, are ideal for the planted aquarium where high phosphate levels would lead to an algae problem.
  • Q: Is Alkaline Buffer a sodium bicarbonate
    A: Yes, it is a sodium bicarbonate-based buffer.
Seachem Alkaline Buffer
$90.12
Seachem Acid Buffer - 300 Grams (10.6 oz)
Seachem Acid Buffer - 300 Grams (10.6 oz) ('116024600)

Seachem Acid Buffer is a non-phosphate buffer to lower pH and buffer with Alkaline Buffer. Both buffers are designed for the planted aquarium or for very hard water where phosphate buffers may pose an algae or cloudiness problem.

  • Lowers aquarium pH and buffers from 6.0 to 8.0
  • Converts alkalinity into CO2
  • For the planted aquarium or very hard water

Seachem Acid Buffer lowers pH and buffers between 5.0 and 8.0 when used with Alkaline Buffer. As Acid Buffer lowers pH it converts carbonate alkalinity (KH) into available CO2. It may also be used to safely lower pH in marine water.

Directions: To lower pH, use 1/4 teaspoon (2g) for every 80 L (20 US gallons) daily until desired pH is reached (this dose lowers alkalinity by about 0.2 meq/L (0.6 dKH)). Larger doses may be required in very hard (KH) or alkaline waters.

Seachem Acid Buffer
$18.92
Seachem Acid Buffer - 1.2 kg (2.6 lbs)
Seachem Acid Buffer - 1.2 kg (2.6 lbs) ('116024709)

Seachem Acid Buffer is a non-phosphate buffer to lower pH and buffer with Alkaline Buffer. Both buffers are designed for the planted aquarium or for very hard water where phosphate buffers may pose an algae or cloudiness problem.

  • Lowers aquarium pH and buffers from 6.0 to 8.0
  • Converts alkalinity into CO2
  • For the planted aquarium or very hard water

Seachem Acid Buffer lowers pH and buffers between 5.0 and 8.0 when used with Alkaline Buffer. As Acid Buffer lowers pH it converts carbonate alkalinity (KH) into available CO2. It may also be used to safely lower pH in marine water.

Directions: To lower pH, use 1/4 teaspoon (2g) for every 80 L (20 US gallons) daily until desired pH is reached (this dose lowers alkalinity by about 0.2 meq/L (0.6 dKH)). Larger doses may be required in very hard (KH) or alkaline waters.

Seachem Acid Buffer
$38.06
Seachem Discus Buffer - 9 oz
Seachem Discus Buffer - 9 oz ('116026604)

SeaChem Discus Buffer helps to replicate the ideal Discus environment (low pH and low GH (General Hardness)). Discus Buffer will lower pH and keep it lowered. Discus Buffer also softens water by precipitating calcium and magnesium.

  • Adjusts pH to 5.8 - 6.8
  • Helps to replicate the ideal Discus environment
  • Softens water by precipitating calcium and magnesium

Use SeaChem Discus Trace to restore the proper level of trace elements required by thriving, healthy Discus.

Directions: Use 1 level teaspoon (7 g) for every 40-80 L (10-20 gallons) daily until intended pH is reached. Thereafter, use once a month or with water changes as required to maintain pH

Seachem Discus Buffer
$10.74
Seachem Discus Buffer - 2.2 lbs
Seachem Discus Buffer - 2.2 lbs ('116026703)

SeaChem Discus Buffer helps to replicate the ideal Discus environment (low pH and low GH (General Hardness)). Discus Buffer will lower pH and keep it lowered. Discus Buffer also softens water by precipitating calcium and magnesium.

  • Adjusts pH to 5.8 - 6.8
  • Helps to replicate the ideal Discus environment
  • Softens water by precipitating calcium and magnesium

Use SeaChem Discus Trace to restore the proper level of trace elements required by thriving, healthy Discus.

Directions: Use 1 level teaspoon (7 g) for every 40-80 L (10-20 gallons) daily until intended pH is reached. Thereafter, use once a month or with water changes as required to maintain pH

Seachem Discus Buffer
$37.10
Seachem Tanganyika Buffer - 8.8 oz
Seachem Tanganyika Buffer - 8.8 oz ('116028608)

Tanganyika Buffer is a blend of carbonate salts designed to enhance the natural environment of cichlids by increasing alkalinity, carbonate hardness, buffer capacity, and pH. It is formulated to maintain a pH of 9.0 to 9.4.

  • Designed to enhance the natural environment of cichlids
  • Increases water hardness, buffer capacity, and pH.
  • Formulated to maintain a pH of 9.0 to 9.4

Instructions: Use 5 g (1 level teaspoon) for each 40 to 80 L (10 to 20 US gallons) of water each day until desired pH is attained and maintained. Thereafter, use as required to maintain pH, usually no more than once every two to three weeks.

TIPS: It is best to dissolve the buffer in freshwater before use. Use when setting up an aquarium or making water changes (preferably after the addition of Seachem Cichlid Lake Salt) and between water changes as needed to maintain pH. Seachem Tanganyika Buffer is formulated to maintain a pH between 9.0 and 9.4, depending on the amount used. For lower pH, use Malawi/Victoria Buffer (pH 7.8 so 8.4), either alone or in combination with Tanganyika Buffer.

Seachem Tanganyika Buffer
$8.32
Seachem Malawi & Victoria Buffer - 1.3 lbs
Seachem Malawi & Victoria Buffer - 1.3 lbs ('116029308)

Seachem Malawi/Victoria Buffer is a blend of carbonate salts designed to enhance the natural environment of cichlids by increasing hardness and buffer capacity, and reaching and maintaining a healthy pH range of 7.8-8.4.

  • Raises and maintains a pH range of 7.8 - 8.4
  • Freshwater aquarium additive increases water hardness (alkalinity)
  • pH conditioner/buffer for Malawi and Victoria cichlids

For optimum replication of the Malawi/Victoria environment, use with Cichlid Lake Salt and Cichlid Trace.

Directions: Use 5 g (1 level teaspoon) for each 10 to 20 gallons of water each day until desired pH is attained and maintained. Thereafter, use as required to maintain pH, usually no more than once every two to three weeks.

Tips: It is best to dissolve the buffer in freshwater before use. Use when setting up an aquarium or making water changes (preferably after the addition of Seachems Cichlid Lake Salt) and between water changes as needed to maintain pH. Seachems Malawi/Victoria Buffer is formulated to maintain a pH between 7.8 and 8.4, depending on the amount used. To attain a lower pH than 7.8, you may use Seachems Acid Buffer in combination with Malawi/Victoria Buffer. To attain a higher pH than 8.4, use Tanganyika Buffer.

Seachem Malawi & Victoria Buffer
$24.90
Seachem Malawi & Victoria Buffer - 9 oz
Seachem Malawi & Victoria Buffer - 9 oz ('116029605)

Seachem Malawi/Victoria Buffer is a blend of carbonate salts designed to enhance the natural environment of cichlids by increasing hardness and buffer capacity, and reaching and maintaining a healthy pH range of 7.8-8.4.

  • Raises and maintains a pH range of 7.8 - 8.4
  • Freshwater aquarium additive increases water hardness (alkalinity)
  • pH conditioner/buffer for Malawi and Victoria cichlids

For optimum replication of the Malawi/Victoria environment, use with Cichlid Lake Salt and Cichlid Trace.

Directions: Use 5 g (1 level teaspoon) for each 10 to 20 gallons of water each day until desired pH is attained and maintained. Thereafter, use as required to maintain pH, usually no more than once every two to three weeks.

Tips: It is best to dissolve the buffer in freshwater before use. Use when setting up an aquarium or making water changes (preferably after the addition of Seachems Cichlid Lake Salt) and between water changes as needed to maintain pH. Seachems Malawi/Victoria Buffer is formulated to maintain a pH between 7.8 and 8.4, depending on the amount used. To attain a lower pH than 7.8, you may use Seachems Acid Buffer in combination with Malawi/Victoria Buffer. To attain a higher pH than 8.4, use Tanganyika Buffer.

Seachem Malawi & Victoria Buffer
$18.80
Seachem Malawi & Victoria Buffer - 2.6 lbs
Seachem Malawi & Victoria Buffer - 2.6 lbs ('116029704)

Seachem Malawi/Victoria Buffer is a blend of carbonate salts designed to enhance the natural environment of cichlids by increasing hardness and buffer capacity, and reaching and maintaining a healthy pH range of 7.8-8.4.

  • Raises and maintains a pH range of 7.8 - 8.4
  • Freshwater aquarium additive increases water hardness (alkalinity)
  • pH conditioner/buffer for Malawi and Victoria cichlids

For optimum replication of the Malawi/Victoria environment, use with Cichlid Lake Salt and Cichlid Trace.

Directions: Use 5 g (1 level teaspoon) for each 10 to 20 gallons of water each day until desired pH is attained and maintained. Thereafter, use as required to maintain pH, usually no more than once every two to three weeks.

Tips: It is best to dissolve the buffer in freshwater before use. Use when setting up an aquarium or making water changes (preferably after the addition of Seachems Cichlid Lake Salt) and between water changes as needed to maintain pH. Seachems Malawi/Victoria Buffer is formulated to maintain a pH between 7.8 and 8.4, depending on the amount used. To attain a lower pH than 7.8, you may use Seachems Acid Buffer in combination with Malawi/Victoria Buffer. To attain a higher pH than 8.4, use Tanganyika Buffer.

Seachem Malawi & Victoria Buffer
$36.98
Seachem Neutral Regulator - 1.1 lbs
Seachem Neutral Regulator - 1.1 lbs ('116030304)

Seachem Neutral Regulator adjusts pH to neutral (pH 7.0) from either a low or high pH and maintains it there. It softens water by precipitating calcium and magnesium while removing any chlorine, chloramine, or ammonia.

  • Adjusts high or low pH to 7.0
  • Removes chlorine, chloramines and ammonia
  • Makes other conditioning unnecessary

The use of SeaChem Neutral Regulator makes other conditioning unnecessary. To lower pH below 7.0 use Neutral Regulator with Acid Regulator (or Discus Buffer). To raise pH above 7.0 use with Alkaline Regulator. All of these products will enhance and stabilize the freshwater aquarium environment.

Use Fresh Trace to restore the proper level of trace elements required by thriving, healthy freshwater community fish.

Seachem Neutral Regulator
$25.82
Seachem Neutral Regulator - 1.8 oz
Seachem Neutral Regulator - 1.8 oz ('116030403)

Seachem Neutral Regulator adjusts pH to neutral (pH 7.0) from either a low or high pH and maintains it there. It softens water by precipitating calcium and magnesium while removing any chlorine, chloramine, or ammonia.

  • Adjusts high or low pH to 7.0
  • Removes chlorine, chloramines and ammonia
  • Makes other conditioning unnecessary

The use of SeaChem Neutral Regulator makes other conditioning unnecessary. To lower pH below 7.0 use Neutral Regulator with Acid Regulator (or Discus Buffer). To raise pH above 7.0 use with Alkaline Regulator. All of these products will enhance and stabilize the freshwater aquarium environment.

Use Fresh Trace to restore the proper level of trace elements required by thriving, healthy freshwater community fish.

Seachem Neutral Regulator
$5.38
Seachem Neutral Regulator - 9 oz
Seachem Neutral Regulator - 9 oz ('116030601)

Seachem Neutral Regulator adjusts pH to neutral (pH 7.0) from either a low or high pH and maintains it there. It softens water by precipitating calcium and magnesium while removing any chlorine, chloramine, or ammonia.

  • Adjusts high or low pH to 7.0
  • Removes chlorine, chloramines and ammonia
  • Makes other conditioning unnecessary

The use of SeaChem Neutral Regulator makes other conditioning unnecessary. To lower pH below 7.0 use Neutral Regulator with Acid Regulator (or Discus Buffer). To raise pH above 7.0 use with Alkaline Regulator. All of these products will enhance and stabilize the freshwater aquarium environment.

Use Fresh Trace to restore the proper level of trace elements required by thriving, healthy freshwater community fish.

Seachem Neutral Regulator
$10.74
Seachem Marine Buffer - 1.1 lbs
Seachem Marine Buffer - 1.1 lbs ('116034302)

Seachem Marine Buffer will safely raise the pH of saltwater to 8.3, and will not raise the pH above 8.3 even if overdosed. Marine Buffer is a blended product, and contains sodium, magnesium, calcium, strontium, and potassium salts to provide effective results.

  • Safely raises and maintains saltwater pH to 8.3
  • More stable than sodium bicarbonate or sodium bicarbonate substitutes
  • Will not raise pH above 8.3 even if inadvertently overdosed

Seachem Marine Buffer is not just sodium bicarbonate or sodium carbonate (commonly sold as a substitute), as these products can raise pH to dangerous levels if not used properly. Instead it includes a variety of minerals and potassium salts of carbonate, bicarbonate, chloride, sulfate, and borate for safe, accurate dosing.

Directions: Add 5g (1 level teaspoon) for each 20 gallons (80 L). Dissolve in at least one cup of freshwater. This dose will also raise alkalinity by about 1 meq/L. Add daily until pH stabilizes at 8.3. This will take from a day to a week, depending on original pH and alkalinity. Thereafter, use biweekly or monthly to maintain a pH of 8.3. If this practice is not adequate, then overstocking, overfeeding, or other poor management practice should be sought as a likely cause. In ionically balanced marine water, Marine Buffer produces little precipitate or cloudiness. If an extensive precipitate forms upon addition of Marine Buffer that does not dissolve within about 15 minutes, then poor ionic balance was present. A water change should be initiated when convenient before further use of the product. Effectiveness improves with continued use. Do not directly mix with any calcium, magnesium, or strontium supplement.

Note: Product is sold by weight, not volume. Contents may settle in shipment.

Seachem Marine Buffer
$24.90
Seachem Marine Buffer - 9 oz
Seachem Marine Buffer - 9 oz ('116034609)

Seachem Marine Buffer will safely raise the pH of saltwater to 8.3, and will not raise the pH above 8.3 even if overdosed. Marine Buffer is a blended product, and contains sodium, magnesium, calcium, strontium, and potassium salts to provide effective results.

  • Safely raises and maintains saltwater pH to 8.3
  • More stable than sodium bicarbonate or sodium bicarbonate substitutes
  • Will not raise pH above 8.3 even if inadvertently overdosed

Seachem Marine Buffer is not just sodium bicarbonate or sodium carbonate (commonly sold as a substitute), as these products can raise pH to dangerous levels if not used properly. Instead it includes a variety of minerals and potassium salts of carbonate, bicarbonate, chloride, sulfate, and borate for safe, accurate dosing.

Directions: Add 5g (1 level teaspoon) for each 20 gallons (80 L). Dissolve in at least one cup of freshwater. This dose will also raise alkalinity by about 1 meq/L. Add daily until pH stabilizes at 8.3. This will take from a day to a week, depending on original pH and alkalinity. Thereafter, use biweekly or monthly to maintain a pH of 8.3. If this practice is not adequate, then overstocking, overfeeding, or other poor management practice should be sought as a likely cause. In ionically balanced marine water, Marine Buffer produces little precipitate or cloudiness. If an extensive precipitate forms upon addition of Marine Buffer that does not dissolve within about 15 minutes, then poor ionic balance was present. A water change should be initiated when convenient before further use of the product. Effectiveness improves with continued use. Do not directly mix with any calcium, magnesium, or strontium supplement.

Note: Product is sold by weight, not volume. Contents may settle in shipment.

Seachem Marine Buffer
$10.06
Seachem Marine Buffer - 2.2 lbs
Seachem Marine Buffer - 2.2 lbs ('116034708)

Seachem Marine Buffer will safely raise the pH of saltwater to 8.3, and will not raise the pH above 8.3 even if overdosed. Marine Buffer is a blended product, and contains sodium, magnesium, calcium, strontium, and potassium salts to provide effective results.

  • Safely raises and maintains saltwater pH to 8.3
  • More stable than sodium bicarbonate or sodium bicarbonate substitutes
  • Will not raise pH above 8.3 even if inadvertently overdosed

Seachem Marine Buffer is not just sodium bicarbonate or sodium carbonate (commonly sold as a substitute), as these products can raise pH to dangerous levels if not used properly. Instead it includes a variety of minerals and potassium salts of carbonate, bicarbonate, chloride, sulfate, and borate for safe, accurate dosing.

Directions: Add 5g (1 level teaspoon) for each 20 gallons (80 L). Dissolve in at least one cup of freshwater. This dose will also raise alkalinity by about 1 meq/L. Add daily until pH stabilizes at 8.3. This will take from a day to a week, depending on original pH and alkalinity. Thereafter, use biweekly or monthly to maintain a pH of 8.3. If this practice is not adequate, then overstocking, overfeeding, or other poor management practice should be sought as a likely cause. In ionically balanced marine water, Marine Buffer produces little precipitate or cloudiness. If an extensive precipitate forms upon addition of Marine Buffer that does not dissolve within about 15 minutes, then poor ionic balance was present. A water change should be initiated when convenient before further use of the product. Effectiveness improves with continued use. Do not directly mix with any calcium, magnesium, or strontium supplement.

Note: Product is sold by weight, not volume. Contents may settle in shipment.

Seachem Marine Buffer
$36.98
Seachem Safe Powder - 2.2 lbs
Seachem Safe Powder - 2.2 lbs ('116038706)

Seachem Safe Powder is a concentrated dry conditioner for freshwater and saltwater aquariums. This concentrated conditioning powder removes chlorine and chloramine from tap water, detoxifies nitrite and nitrate, and converts ammonia into a safe, non-toxic form for more efficient removal by the biofilter.

  • Removes chlorine, chloramine and ammonia from water
  • Detoxifies nitrite and nitrate
  • Non-acidic, highly effective dry conditioner for fresh and saltwater

Seachem Safe Powder will not impact pH levels or overactivate skimmers. It may be used during tank cycling to alleviate ammonia/nitrite toxicity, during start-up or whenever adding or replacing water.

Note: Safe is the dry version of Seachem Prime and shares all of its advantages; however, Safe is even more concentrated than Prime.

Directions for Use:
Note: These directions supersede all other prior packaging.

Directions for 10 g and 50 g:
Use 100 mg Safe (scoop) per each 100 L (25 gallons) as needed to reduce chlorine and chloramine or per 25 L (6 gallons) for ammonia.

Directions for all other sizes:
Use 1.25 g (1/4 tsp.) for every 1,250 L (300 gallons) as needed to reduce chlorine and chloramine or use 1.25 g (1/4 tsp.) for every 300 L (75 gallons) for ammonia.

May be added to aquarium directly, but better if added to new water first. If adding directly to aquarium, base dose on aquarium volume. For exceptionally high chloramine concentrations, a double dose may be used safely. To detoxify nitrite and nitrate in an emergency, up to 4 times normal dose may be used. If temperature is > 30 °C (86 °F) and chlorine or ammonia levels are low, use a half dose.

Seachem Safe Powder
$53.62
Seachem Prime Water Conditioner F/W &S/W - 20 Liters (5.3 Gallons)
Seachem Prime Water Conditioner F/W &S/W - 20 Liters (5.3 Gallons) ('116043106)

Seachem Prime is the complete and concentrated conditioner for both fresh and saltwater aquariums. Use during startup and water changes to eliminate and detoxify harmful chemicals in tap water and make your aquarium safe for fish.

  • Removes chlorine, chloramine and toxic ammonia
  • Detoxifies nitrite and nitrate
  • Provides protective slime coat

Prime is safe for fresh and saltwater aquariums. It detoxifies ammonia, nitrite and nitrate, allowing the biofilter to more efficiently remove them. Use Sechem Prime to detoxify any heavy metals found in the tap water at typical concentration levels. Prime also promotes the production and regeneration of the natural slime coat. Seachem Prime is non-acidic, will not impact pH and will not overactivate skimmers.

Use at startup and whenever adding or replacing water. Prime may also be used during tank cycling to alleviate ammonia/nitrite toxicity.

Directions: Use 1 capful (5 ml) for each 200 L (50 gallons) of new water. This removes approximately 1 mg/L ammonia, 4 mg/L chloramine, or 5 mg/L chlorine. For smaller doses, please note each cap thread is approx. 1 ml.

Tips: May be added to aquarium directly, but better if added to new water first. If adding directly to aquarium, base dose on aquarium volume. Sulfur odor is normal. For exceptionally high chloramine concentrations, a double dose may be used safely. To detoxify nitrite in an emergency, up to 5 times normal dose may be used. If temperature is > 30 °C (86 °F) and chlorine or ammonia levels are low, use a half dose.

Seachem Prime Water Conditioner F/W &S/W
$510.94
Seachem Prime Water Conditioner F/W &S/W - 500 ml (16.9 oz)
Seachem Prime Water Conditioner F/W &S/W - 500 ml (16.9 oz) ('116043304)

Seachem Prime is the complete and concentrated conditioner for both fresh and saltwater aquariums. Use during startup and water changes to eliminate and detoxify harmful chemicals in tap water and make your aquarium safe for fish.

  • Removes chlorine, chloramine and toxic ammonia
  • Detoxifies nitrite and nitrate
  • Provides protective slime coat

Prime is safe for fresh and saltwater aquariums. It detoxifies ammonia, nitrite and nitrate, allowing the biofilter to more efficiently remove them. Use Sechem Prime to detoxify any heavy metals found in the tap water at typical concentration levels. Prime also promotes the production and regeneration of the natural slime coat. Seachem Prime is non-acidic, will not impact pH and will not overactivate skimmers.

Use at startup and whenever adding or replacing water. Prime may also be used during tank cycling to alleviate ammonia/nitrite toxicity.

Directions: Use 1 capful (5 ml) for each 200 L (50 gallons) of new water. This removes approximately 1 mg/L ammonia, 4 mg/L chloramine, or 5 mg/L chlorine. For smaller doses, please note each cap thread is approx. 1 ml.

Tips: May be added to aquarium directly, but better if added to new water first. If adding directly to aquarium, base dose on aquarium volume. Sulfur odor is normal. For exceptionally high chloramine concentrations, a double dose may be used safely. To detoxify nitrite in an emergency, up to 5 times normal dose may be used. If temperature is > 30 °C (86 °F) and chlorine or ammonia levels are low, use a half dose.

Seachem Prime Water Conditioner F/W &S/W
$31.36
Seachem Prime Water Conditioner F/W &S/W - 50 ml (1.7 oz)
Seachem Prime Water Conditioner F/W &S/W - 50 ml (1.7 oz) ('116043403)

Seachem Prime is the complete and concentrated conditioner for both fresh and saltwater aquariums. Use during startup and water changes to eliminate and detoxify harmful chemicals in tap water and make your aquarium safe for fish.

  • Removes chlorine, chloramine and toxic ammonia
  • Detoxifies nitrite and nitrate
  • Provides protective slime coat

Prime is safe for fresh and saltwater aquariums. It detoxifies ammonia, nitrite and nitrate, allowing the biofilter to more efficiently remove them. Use Sechem Prime to detoxify any heavy metals found in the tap water at typical concentration levels. Prime also promotes the production and regeneration of the natural slime coat. Seachem Prime is non-acidic, will not impact pH and will not overactivate skimmers.

Use at startup and whenever adding or replacing water. Prime may also be used during tank cycling to alleviate ammonia/nitrite toxicity.

Directions: Use 1 capful (5 ml) for each 200 L (50 gallons) of new water. This removes approximately 1 mg/L ammonia, 4 mg/L chloramine, or 5 mg/L chlorine. For smaller doses, please note each cap thread is approx. 1 ml.

Tips: May be added to aquarium directly, but better if added to new water first. If adding directly to aquarium, base dose on aquarium volume. Sulfur odor is normal. For exceptionally high chloramine concentrations, a double dose may be used safely. To detoxify nitrite in an emergency, up to 5 times normal dose may be used. If temperature is > 30 °C (86 °F) and chlorine or ammonia levels are low, use a half dose.

Seachem Prime Water Conditioner F/W &S/W
$4.28
Seachem Prime Water Conditioner F/W &S/W - 100 ml (3.4 oz)
Seachem Prime Water Conditioner F/W &S/W - 100 ml (3.4 oz) ('116043502)

Seachem Prime is the complete and concentrated conditioner for both fresh and saltwater aquariums. Use during startup and water changes to eliminate and detoxify harmful chemicals in tap water and make your aquarium safe for fish.

  • Removes chlorine, chloramine and toxic ammonia
  • Detoxifies nitrite and nitrate
  • Provides protective slime coat

Prime is safe for fresh and saltwater aquariums. It detoxifies ammonia, nitrite and nitrate, allowing the biofilter to more efficiently remove them. Use Sechem Prime to detoxify any heavy metals found in the tap water at typical concentration levels. Prime also promotes the production and regeneration of the natural slime coat. Seachem Prime is non-acidic, will not impact pH and will not overactivate skimmers.

Use at startup and whenever adding or replacing water. Prime may also be used during tank cycling to alleviate ammonia/nitrite toxicity.

Directions: Use 1 capful (5 ml) for each 200 L (50 gallons) of new water. This removes approximately 1 mg/L ammonia, 4 mg/L chloramine, or 5 mg/L chlorine. For smaller doses, please note each cap thread is approx. 1 ml.

Tips: May be added to aquarium directly, but better if added to new water first. If adding directly to aquarium, base dose on aquarium volume. Sulfur odor is normal. For exceptionally high chloramine concentrations, a double dose may be used safely. To detoxify nitrite in an emergency, up to 5 times normal dose may be used. If temperature is > 30 °C (86 °F) and chlorine or ammonia levels are low, use a half dose.

Seachem Prime Water Conditioner F/W &S/W
$6.40
Seachem Prime Water Conditioner F/W &S/W - 250 ml (8.5 oz)
Seachem Prime Water Conditioner F/W &S/W - 250 ml (8.5 oz) ('116043601)

Seachem Prime is the complete and concentrated conditioner for both fresh and saltwater aquariums. Use during startup and water changes to eliminate and detoxify harmful chemicals in tap water and make your aquarium safe for fish.

  • Removes chlorine, chloramine and toxic ammonia
  • Detoxifies nitrite and nitrate
  • Provides protective slime coat

Prime is safe for fresh and saltwater aquariums. It detoxifies ammonia, nitrite and nitrate, allowing the biofilter to more efficiently remove them. Use Sechem Prime to detoxify any heavy metals found in the tap water at typical concentration levels. Prime also promotes the production and regeneration of the natural slime coat. Seachem Prime is non-acidic, will not impact pH and will not overactivate skimmers.

Use at startup and whenever adding or replacing water. Prime may also be used during tank cycling to alleviate ammonia/nitrite toxicity.

Directions: Use 1 capful (5 ml) for each 200 L (50 gallons) of new water. This removes approximately 1 mg/L ammonia, 4 mg/L chloramine, or 5 mg/L chlorine. For smaller doses, please note each cap thread is approx. 1 ml.

Tips: May be added to aquarium directly, but better if added to new water first. If adding directly to aquarium, base dose on aquarium volume. Sulfur odor is normal. For exceptionally high chloramine concentrations, a double dose may be used safely. To detoxify nitrite in an emergency, up to 5 times normal dose may be used. If temperature is > 30 °C (86 °F) and chlorine or ammonia levels are low, use a half dose.

Seachem Prime Water Conditioner F/W &S/W
$12.98
Seachem Prime Water Conditioner F/W &S/W - 1 Liter (33.8 oz)
Seachem Prime Water Conditioner F/W &S/W - 1 Liter (33.8 oz) ('116043700)

Seachem Prime is the complete and concentrated conditioner for both fresh and saltwater aquariums. Use during startup and water changes to eliminate and detoxify harmful chemicals in tap water and make your aquarium safe for fish.

  • Removes chlorine, chloramine and toxic ammonia
  • Detoxifies nitrite and nitrate
  • Provides protective slime coat

Prime is safe for fresh and saltwater aquariums. It detoxifies ammonia, nitrite and nitrate, allowing the biofilter to more efficiently remove them. Use Sechem Prime to detoxify any heavy metals found in the tap water at typical concentration levels. Prime also promotes the production and regeneration of the natural slime coat. Seachem Prime is non-acidic, will not impact pH and will not overactivate skimmers.

Use at startup and whenever adding or replacing water. Prime may also be used during tank cycling to alleviate ammonia/nitrite toxicity.

Directions: Use 1 capful (5 ml) for each 200 L (50 gallons) of new water. This removes approximately 1 mg/L ammonia, 4 mg/L chloramine, or 5 mg/L chlorine. For smaller doses, please note each cap thread is approx. 1 ml.

Tips: May be added to aquarium directly, but better if added to new water first. If adding directly to aquarium, base dose on aquarium volume. Sulfur odor is normal. For exceptionally high chloramine concentrations, a double dose may be used safely. To detoxify nitrite in an emergency, up to 5 times normal dose may be used. If temperature is > 30 °C (86 °F) and chlorine or ammonia levels are low, use a half dose.

Seachem Prime Water Conditioner F/W &S/W
$50.46
Seachem Prime Water Conditioner F/W &S/W - 2 Liters (67.6 oz)
Seachem Prime Water Conditioner F/W &S/W - 2 Liters (67.6 oz) ('116043809)

Seachem Prime is the complete and concentrated conditioner for both fresh and saltwater aquariums. Use during startup and water changes to eliminate and detoxify harmful chemicals in tap water and make your aquarium safe for fish.

  • Removes chlorine, chloramine and toxic ammonia
  • Detoxifies nitrite and nitrate
  • Provides protective slime coat

Prime is safe for fresh and saltwater aquariums. It detoxifies ammonia, nitrite and nitrate, allowing the biofilter to more efficiently remove them. Use Sechem Prime to detoxify any heavy metals found in the tap water at typical concentration levels. Prime also promotes the production and regeneration of the natural slime coat. Seachem Prime is non-acidic, will not impact pH and will not overactivate skimmers.

Use at startup and whenever adding or replacing water. Prime may also be used during tank cycling to alleviate ammonia/nitrite toxicity.

Directions: Use 1 capful (5 ml) for each 200 L (50 gallons) of new water. This removes approximately 1 mg/L ammonia, 4 mg/L chloramine, or 5 mg/L chlorine. For smaller doses, please note each cap thread is approx. 1 ml.

Tips: May be added to aquarium directly, but better if added to new water first. If adding directly to aquarium, base dose on aquarium volume. Sulfur odor is normal. For exceptionally high chloramine concentrations, a double dose may be used safely. To detoxify nitrite in an emergency, up to 5 times normal dose may be used. If temperature is > 30 °C (86 °F) and chlorine or ammonia levels are low, use a half dose.

Seachem Prime Water Conditioner F/W &S/W
$64.72
Seachem Prime Water Conditioner F/W &S/W - 4 Liters (1.1 Gallon)
Seachem Prime Water Conditioner F/W &S/W - 4 Liters (1.1 Gallon) ('116043908)

Seachem Prime is the complete and concentrated conditioner for both fresh and saltwater aquariums. Use during startup and water changes to eliminate and detoxify harmful chemicals in tap water and make your aquarium safe for fish.

  • Removes chlorine, chloramine and toxic ammonia
  • Detoxifies nitrite and nitrate
  • Provides protective slime coat

Prime is safe for fresh and saltwater aquariums. It detoxifies ammonia, nitrite and nitrate, allowing the biofilter to more efficiently remove them. Use Sechem Prime to detoxify any heavy metals found in the tap water at typical concentration levels. Prime also promotes the production and regeneration of the natural slime coat. Seachem Prime is non-acidic, will not impact pH and will not overactivate skimmers.

Use at startup and whenever adding or replacing water. Prime may also be used during tank cycling to alleviate ammonia/nitrite toxicity.

Directions: Use 1 capful (5 ml) for each 200 L (50 gallons) of new water. This removes approximately 1 mg/L ammonia, 4 mg/L chloramine, or 5 mg/L chlorine. For smaller doses, please note each cap thread is approx. 1 ml.

Tips: May be added to aquarium directly, but better if added to new water first. If adding directly to aquarium, base dose on aquarium volume. Sulfur odor is normal. For exceptionally high chloramine concentrations, a double dose may be used safely. To detoxify nitrite in an emergency, up to 5 times normal dose may be used. If temperature is > 30 °C (86 °F) and chlorine or ammonia levels are low, use a half dose.

Seachem Prime Water Conditioner F/W &S/W
$112.26
Seachem StressGuard - 17 oz
Seachem StressGuard - 17 oz ('116052306)

Seachem StressGuard is a premium slime coat protector for marine and freshwater aquariums. Using a unique formula, StressGuard reduces fish stress from transportation or handling, promotes healing, and acts as an antiseptic to reduce the risk of infection.

  • Premium slime coat protection product for fresh and saltwater aquariums
  • Reduces stress when handling or transporting fish
  • Promotes healing and acts as an antiseptic for fish

StressGuard is compatible with all non-copper based medications. It is not amine-based and will not interfere with Purigen or HyperSorb, and does not coat resins or clog filtration like other slime coat products can.

What sets StressGuard apart The secret is a protein active colloidal agent that actively seeks out any wounds, abrasions, or exposed proteins, and attaches to the area to deliver disinfectant and begin healing. In the process, the agent also acts as a liquid bandage to keep the abrasion protected. And unlike other slime coats, StressGuard has a pH of 7.0 - meaning it will never interfere with the pH of your aquarium, even when used in large doses.

Directions: Use 1/2–1 capful (2.5–5 mL) to every 10 gallons (40 L) daily until signs of stress have abated or healing is complete. Dose may be safely doubled.

Seachem StressGuard
$26.88
Seachem StressGuard - 3.4 oz
Seachem StressGuard - 3.4 oz ('116052504)

Seachem StressGuard is a premium slime coat protector for marine and freshwater aquariums. Using a unique formula, StressGuard reduces fish stress from transportation or handling, promotes healing, and acts as an antiseptic to reduce the risk of infection.

  • Premium slime coat protection product for fresh and saltwater aquariums
  • Reduces stress when handling or transporting fish
  • Promotes healing and acts as an antiseptic for fish

StressGuard is compatible with all non-copper based medications. It is not amine-based and will not interfere with Purigen or HyperSorb, and does not coat resins or clog filtration like other slime coat products can.

What sets StressGuard apart The secret is a protein active colloidal agent that actively seeks out any wounds, abrasions, or exposed proteins, and attaches to the area to deliver disinfectant and begin healing. In the process, the agent also acts as a liquid bandage to keep the abrasion protected. And unlike other slime coats, StressGuard has a pH of 7.0 - meaning it will never interfere with the pH of your aquarium, even when used in large doses.

Directions: Use 1/2–1 capful (2.5–5 mL) to every 10 gallons (40 L) daily until signs of stress have abated or healing is complete. Dose may be safely doubled.

Seachem StressGuard
$6.32
Seachem StressGuard - 8.5 oz
Seachem StressGuard - 8.5 oz ('116052603)

Seachem StressGuard is a premium slime coat protector for marine and freshwater aquariums. Using a unique formula, StressGuard reduces fish stress from transportation or handling, promotes healing, and acts as an antiseptic to reduce the risk of infection.

  • Premium slime coat protection product for fresh and saltwater aquariums
  • Reduces stress when handling or transporting fish
  • Promotes healing and acts as an antiseptic for fish

StressGuard is compatible with all non-copper based medications. It is not amine-based and will not interfere with Purigen or HyperSorb, and does not coat resins or clog filtration like other slime coat products can.

What sets StressGuard apart The secret is a protein active colloidal agent that actively seeks out any wounds, abrasions, or exposed proteins, and attaches to the area to deliver disinfectant and begin healing. In the process, the agent also acts as a liquid bandage to keep the abrasion protected. And unlike other slime coats, StressGuard has a pH of 7.0 - meaning it will never interfere with the pH of your aquarium, even when used in large doses.

Directions: Use 1/2–1 capful (2.5–5 mL) to every 10 gallons (40 L) daily until signs of stress have abated or healing is complete. Dose may be safely doubled.

Seachem StressGuard
$10.44
Seachem Para Guard Parasite Control - 17 oz (500 mL)
Seachem Para Guard Parasite Control - 17 oz (500 mL) ('116060301)

Seachem ParaGuard is the only fish and filter safe aldehyde based (10% by weight) parasite control product available. Unlike highly toxic and difficult to use formalin based medications, Seachem ParaGuard contains no formaldehyde or methanol and will not alter pH.

  • Parasite Control for marine or freshwater aquariums
  • Contains no toxic methanol and will not alter pH
  • Safe alternative to formalin

Seachem ParaGuard employs a proprietary, synergistic blend of aldehydes, malachite green, and fish protective polymers that effectively and efficiently eradicates many ectoparasites (e.g. ich, etc.) and external fungal/bacterial/viral lesions (e.g., fin rot).

It is particularly useful in hospital and receiving tanks for new fish and whenever new fish are introduced to a community tank.

DIRECTIONS: In the aquarium, use 5 mL (1 capful) to every 40 L (10 gallons). Repeat daily as required as long as fish show no stress. For 1 hour dips, use 3 mL per 4 L (1 gallon). Dips may be extended if fish show no evidence of stress. In case of eye exposure, promptly and thoroughly wash eyes with water and seek medical attention.

Seachem Para Guard Parasite Control
$27.40
Seachem Para Guard Parasite Control - 3.4 oz (100 mL)
Seachem Para Guard Parasite Control - 3.4 oz (100 mL) ('116060509)

Seachem ParaGuard is the only fish and filter safe aldehyde based (10% by weight) parasite control product available. Unlike highly toxic and difficult to use formalin based medications, Seachem ParaGuard contains no formaldehyde or methanol and will not alter pH.

  • Parasite Control for marine or freshwater aquariums
  • Contains no toxic methanol and will not alter pH
  • Safe alternative to formalin

Seachem ParaGuard employs a proprietary, synergistic blend of aldehydes, malachite green, and fish protective polymers that effectively and efficiently eradicates many ectoparasites (e.g. ich, etc.) and external fungal/bacterial/viral lesions (e.g., fin rot).

It is particularly useful in hospital and receiving tanks for new fish and whenever new fish are introduced to a community tank.

DIRECTIONS: In the aquarium, use 5 mL (1 capful) to every 40 L (10 gallons). Repeat daily as required as long as fish show no stress. For 1 hour dips, use 3 mL per 4 L (1 gallon). Dips may be extended if fish show no evidence of stress. In case of eye exposure, promptly and thoroughly wash eyes with water and seek medical attention.

Seachem Para Guard Parasite Control
$8.96
Seachem Para Guard Parasite Control - 8.5 oz (250 mL)
Seachem Para Guard Parasite Control - 8.5 oz (250 mL) ('116060608)

Seachem ParaGuard is the only fish and filter safe aldehyde based (10% by weight) parasite control product available. Unlike highly toxic and difficult to use formalin based medications, Seachem ParaGuard contains no formaldehyde or methanol and will not alter pH.

  • Parasite Control for marine or freshwater aquariums
  • Contains no toxic methanol and will not alter pH
  • Safe alternative to formalin

Seachem ParaGuard employs a proprietary, synergistic blend of aldehydes, malachite green, and fish protective polymers that effectively and efficiently eradicates many ectoparasites (e.g. ich, etc.) and external fungal/bacterial/viral lesions (e.g., fin rot).

It is particularly useful in hospital and receiving tanks for new fish and whenever new fish are introduced to a community tank.

DIRECTIONS: In the aquarium, use 5 mL (1 capful) to every 40 L (10 gallons). Repeat daily as required as long as fish show no stress. For 1 hour dips, use 3 mL per 4 L (1 gallon). Dips may be extended if fish show no evidence of stress. In case of eye exposure, promptly and thoroughly wash eyes with water and seek medical attention.

Seachem Para Guard Parasite Control
$13.00
Seachem Sulfaplex Bacterial, Fungal and Protozoan Treatment - 0.4 oz
Seachem Sulfaplex Bacterial, Fungal and Protozoan Treatment - 0.4 oz ('116084208)

SulfaPlex is an effective and safe treatment for many bacterial, fungal and protozoan infestations in the aquarium. While it can be used in both freshwater and saltwater, it is particularly effective against the common bacterial and fungal infections of freshwater fish. It is also among the gentler antibiotics, and great for treating fish that are already stressed. It is easily removed with carbon and does not impair nitrification.

  • Treats Many Bacterial, Fungal, and Protozoan Infestations
  • Broad Spectrum Antibiotic and Anti-Fungal Medicatoin
  • Absorbed Through Gills
  • Marine & Freshwater
  • One of the Gentler Antibiotics, Great for Treating Fish that are Already Stressed.

INSTRUCTIONS: Dosing in Water Remove all invertebrates - these are extremely sensitive to medication. Turn off UV filters, ozone filters, and remove chemical filtration like MatrixCarbon and Purigen. Use 2-3 measures (included) per every 40 L (10 US gallons). Repeat this dose every 72 hours for a maximum of 3 weeks. Dosing in Food SulfaPlex is most effective when used in the water, but it can also be added to the food. Feed the medicated food mix (recipe below) every day until the infection clears or up to 3 weeks. 1 scoop SulfaPlex, 1 scoop Focus, 1 tbsp food (preferably pellets or frozen food). A few drops of water if using a dry food. To enhance palatability use with GarlicGuard or Entice. After Treating When the treatment period is over, SulfaPlex can easily be removed using activated filter carbon like MatrixCarbon. It does not linger in the substrate or filter media of the tank.

INGREDIENTS: sulfathiazole (69%) Inactive ingredients: excipients (31%)

Seachem Sulfaplex Bacterial, Fungal and Protozoan Treatment
$10.12
Seachem Replenish - 500 ml - (Treats 1,000 Gallons)
Seachem Replenish - 500 ml - (Treats 1,000 Gallons) ('116147309)

Seachem Replenish is specially designed to replenish physiologically needed minerals that have been removed during reverse osmosis or deionizing filtration.

  • Designed to replenish physiologically needed minerals
  • Restore General Hardness (GH) using "soft" and "hard" salts
  • Helps prevent sudden death due to osmotic stress

Replenish will restore General Hardness (GH) using "soft" and "hard" salts. This special blend of salts will help prevent sudden death due to osmotic stress which causes osmotic shock.

Dosage: 500 ml (16.9 oz) treats 1,000 gallons.

Directions: Add 5 mL (1 capful) Replenish to 10 Gallons to raise GH by 1 meq/L (2.8 dGH). Recommended restoration level into DI or RO water is 1-2 meq/L which is 5 mL per each 5-10 gallons.

Seachem Replenish
$15.94
Weco Wonder Shell De-Chlorinator - Small - For Bowls up to 1 Gallon (3 Pack)
Weco Wonder Shell De-Chlorinator - Small - For Bowls up to 1 Gallon (3 Pack) ('28023810000)

Weco Wonder Shells are great for pH, calcium and water hardness control in small aquariums and fish bowls. These all-in-one treatments provide calcium carbonate, sodium thiosulfate, and necessary trace elements, including magnesium.

  • Helps keep aquarium clear and maintains stable pH levels
  • Adds necessary minerals while removing chlorine
  • Great for goldfish, livebearers, cichlids and more

Weco Wonder Shells provide magnesium and calcium, which have been proven to help fish during stress and to prevent disease due to acid buildup in the body. These shells instantly remove chlorine and chloramines from tap water while also clearing cloudiness. Scour inner glass walls with a Wonder Shell to remove scum and to deter its return.

Sizing:
Small: Bowls up to 1 Gallon
Large: Tanks up to 5 Gallons
Super: Tanks 10-15 Gallons
Giant: Fish Ponds

Weco Wonder Shell De-Chlorinator
$4.52
Weco Wonder Shell De-Chlorinator - Large - For 5 Gallon Aquariums (1 Pack)
Weco Wonder Shell De-Chlorinator - Large - For 5 Gallon Aquariums (1 Pack) ('28023820009)

Weco Wonder Shells are great for pH, calcium and water hardness control in small aquariums and fish bowls. These all-in-one treatments provide calcium carbonate, sodium thiosulfate, and necessary trace elements, including magnesium.

  • Helps keep aquarium clear and maintains stable pH levels
  • Adds necessary minerals while removing chlorine
  • Great for goldfish, livebearers, cichlids and more

Weco Wonder Shells provide magnesium and calcium, which have been proven to help fish during stress and to prevent disease due to acid buildup in the body. These shells instantly remove chlorine and chloramines from tap water while also clearing cloudiness. Scour inner glass walls with a Wonder Shell to remove scum and to deter its return.

Sizing:
Small: Bowls up to 1 Gallon
Large: Tanks up to 5 Gallons
Super: Tanks 10-15 Gallons
Giant: Fish Ponds

Weco Wonder Shell De-Chlorinator
$3.76
Weco Wonder Shell De-Chlorinator - Super - For 10-15 Gallon Aquariums (1 Pack)
Weco Wonder Shell De-Chlorinator - Super - For 10-15 Gallon Aquariums (1 Pack) ('28023830008)

Weco Wonder Shells are great for pH, calcium and water hardness control in small aquariums and fish bowls. These all-in-one treatments provide calcium carbonate, sodium thiosulfate, and necessary trace elements, including magnesium.

  • Helps keep aquarium clear and maintains stable pH levels
  • Adds necessary minerals while removing chlorine
  • Great for goldfish, livebearers, cichlids and more

Weco Wonder Shells provide magnesium and calcium, which have been proven to help fish during stress and to prevent disease due to acid buildup in the body. These shells instantly remove chlorine and chloramines from tap water while also clearing cloudiness. Scour inner glass walls with a Wonder Shell to remove scum and to deter its return.

Sizing:
Small: Bowls up to 1 Gallon
Large: Tanks up to 5 Gallons
Super: Tanks 10-15 Gallons
Giant: Fish Ponds

Weco Wonder Shell De-Chlorinator
$4.52
Weco Wonder Shell De-Chlorinator - Giant - For Fish Ponds (1 Pack)
Weco Wonder Shell De-Chlorinator - Giant - For Fish Ponds (1 Pack) ('28023840007)

Weco Wonder Shells are great for pH, calcium and water hardness control in small aquariums and fish bowls. These all-in-one treatments provide calcium carbonate, sodium thiosulfate, and necessary trace elements, including magnesium.

  • Helps keep aquarium clear and maintains stable pH levels
  • Adds necessary minerals while removing chlorine
  • Great for goldfish, livebearers, cichlids and more

Weco Wonder Shells provide magnesium and calcium, which have been proven to help fish during stress and to prevent disease due to acid buildup in the body. These shells instantly remove chlorine and chloramines from tap water while also clearing cloudiness. Scour inner glass walls with a Wonder Shell to remove scum and to deter its return.

Sizing:
Small: Bowls up to 1 Gallon
Large: Tanks up to 5 Gallons
Super: Tanks 10-15 Gallons
Giant: Fish Ponds

Weco Wonder Shell De-Chlorinator
$5.42
Marina Betta Pure Tap Water Conditioner - 25 ml
Marina Betta Pure Tap Water Conditioner - 25 ml ('15561179171)

Marina Betta Pure Water Conditioner makes tap water safe for your betta by removing harmful chlorine, chloramine and heavy metals found in tap water. Protects fish with a healthy slime coat. Use for new aquarium setups, when adding new water, or during fish transport.

  • Immediately Removes Chlorine, Chloramines, and Heavy Metals
  • Makes tap Water Safe for Your Betta
  • Great for New Aquarium Setup, Water changes, and Fish Transport
  • Contains Goji Berry

INSTRUCTIONS: Shake well before use. Add 10 drops to aquarium when adding water or during water changes (10 drops treats 1.5 gallons)

Marina Betta Pure Tap Water Conditioner
$3.90
Nutrafin Betta Plus Tap Water Conditioner  - 2 oz
Nutrafin Betta Plus Tap Water Conditioner - 2 oz ('15561179201)

Nutrafin Betta Plus - Tap Water Conditioner makes tap water safe for bettas by neutralizing chlorine, chloramine and undesirable metals. Betta Plus protects fish scales and fins, reduces nitrite toxicity, and helps reduce stress. It also helps reduce inflammation and undesirable conditions that can arise from scrapes, torn fins, and abrasions. Betta Plus also contains tropical almond leaf extract, a natural element found in betta habitats, that conditions and supports a betta-friendly environment, allowing them to thrive and show their full-color potential.

  • Makes Tap Water Safe for Bettas
  • Protects Scales and Fins
  • Contains Tropical Almond Leaf Extract
  • Helps to Reduce Stress
  • Helps Reduced Inflammation from Scrapes, Torn Fins and Abrasions

INSTRUCTIONS: Shake well before using. 5 mL (approx. 1 capful) treats 2 L (0.5 U.S. gal) with every water change.

Nutrafin Betta Plus Tap Water Conditioner
$3.90
Nutrafin Betta Plus Tap Water Conditioner  - 4 oz
Nutrafin Betta Plus Tap Water Conditioner - 4 oz ('15561179225)

Nutrafin Betta Plus - Tap Water Conditioner makes tap water safe for bettas by neutralizing chlorine, chloramine and undesirable metals. Betta Plus protects fish scales and fins, reduces nitrite toxicity, and helps reduce stress. It also helps reduce inflammation and undesirable conditions that can arise from scrapes, torn fins, and abrasions. Betta Plus also contains tropical almond leaf extract, a natural element found in betta habitats, that conditions and supports a betta-friendly environment, allowing them to thrive and show their full-color potential.

  • Makes Tap Water Safe for Bettas
  • Protects Scales and Fins
  • Contains Tropical Almond Leaf Extract
  • Helps to Reduce Stress
  • Helps Reduced Inflammation from Scrapes, Torn Fins and Abrasions

INSTRUCTIONS: Shake well before using. 5 mL (approx. 1 capful) treats 2 L (0.5 U.S. gal) with every water change.

Nutrafin Betta Plus Tap Water Conditioner
$7.34
Nutrafin Betta Enviro-Clean Waste Remover - 2 oz
Nutrafin Betta Enviro-Clean Waste Remover - 2 oz ('15561179249)

Nutrafin Betta Enviro-Clean 60 mL (2 fl oz), is a betta bowl cleaner that biologically breaks down waste in betta bowls and containers while promoting clean conditions that help reduce diseases.

  • Biological Betta Bowl Cleaner
  • Reduces Organic Waste in Betta Bowls
  • Helps Reduce Disease
  • Helps Reduce Stress

INSTRUCTIONS: Shake well before using 2.5 mL (approx. ? capful) treats 3.78 L (1 U.S. gal / 0.83 U.K. gal) with every water change

Nutrafin Betta Enviro-Clean Waste Remover
$7.22
Kordon NovAqua Water Conditioner - 8 oz
Kordon NovAqua Water Conditioner - 8 oz ('048054311482)

Kordon NovAqua provides a protective colloid coating on a fishs body when the natural slime has been removed due to injury, disease or rough handling.

  • Adds protective skin slime to fish
  • Water conditioner for freshwater and saltwater aquariums
  • Detoxifies chlorine and Chloramines from tap water and removes toxic metals

The coating acts like an invisible bandage, providing a barrier against serious loss of internal fluids and electrolytes and protects damaged areas of the body against external toxins and disease-causing organisms.

Kordon NovAqua aids in concentrating certain drugs and antibacterial at the diseased or damaged site. NovAqua detoxifies heavy metals and is capable of eliminating free copper ions from solution.

Each ounce treats 60 gallons of water. Amquel protects pond fishes and invertebrates by quick elimination, in a true single step-action three of the most toxic chemicals commonly found in water.

1 oz - Treats 60 Gallons
4 oz - Treats 240 Gallons
8 oz - Treats 480 Gallons
16 oz - Treats 960 Gallons
1 Gallon - Treats 7,693 Gallons
5 Gallons - Treats 38,400 Gallons

Kordon NovAqua Water Conditioner
$11.58
Kordon NovAqua + Water Conditioner - 1 oz
Kordon NovAqua + Water Conditioner - 1 oz ('048054331114)

Kordon NovAqua Plus will help protect the health of both fishes and invertebrates by inhibiting viruses and harmful bacteria, and by providing an immune system booster and a protective body slime replacer.

  • Provides a protective skin slime coat
  • Contains organic immune health aids
  • Adds electrolytes and vitamins
  • Provides an organic virus inhibitor
  • Removes chlorine and toxic metals
  • Breaks down chloramines

In addition, NovAqua Plus adds electrolytes needed for proper osmotic balance, and detoxifies tap water by removing all chlorine, balancing alkalinity, and helping stabilize water pH. NovAqua Plus will not harm plants, beneficial bacteria or biological filters contains no phosphates, and will not contaminate ground or wastewater.

The manufacturer states, for any Kordon water conditioners, including the NovAqua products, they are "Nontoxic to humans, pets, and aquatic life." This is included on most of their product labels as well.

1 oz - Treats 60 Gallons
4 oz - Treats 240 Gallons
8 oz - Treats 480 Gallons
16 oz - Treats 960 Gallons
1 Gallon - Treats 7,693 Gallons
5 Gallons - Treats 38,400 Gallons

Kordon NovAqua + Water Conditioner
$3.06
Kordon NovAqua + AmQuel Start Smart Instant Water Conditioning Kit - 4 oz
Kordon NovAqua + AmQuel Start Smart Instant Water Conditioning Kit - 4 oz ('048054313141)

Kordon E.P.A Conditioning Kit contains bottles of both AmQuel and NovAqua Water Conditioners. This kit is suitable for treating fresh or salt water.

  • Detoxifies tap water
  • Breaks down chloramines
  • Removes nitrate, nitrite, ammonia and chlorine

The NovAqua and AmQuel that are included in this Aquarium Water Conditioning Kit will condition water (either tap water or bottled drinking water) to make it suitable for fishes and invertebrates. NovAqua and AmQuel will also improve the conditions in existing aquariums.

Many fish are tolerant of a wide range of water conditions, but all fishes need good, clean, non-toxic water. AmQuel and NovAqua are designed to be used alone or in combination to perform many essential functions necessary for keeping fishes and invertebrates alive in fresh or saltwater aquariums, including the removal of chlorine, ammonia, chloramines, copper and other heavy metals. In addition, NovAqua acts as a stress reducer by supplying the needed electrolytes and an artificial skin coating to help prevent shock and stress during water changes or handling.

Kordon NovAqua + AmQuel Start Smart Instant Water Conditioning Kit
$15.26
Kordon NovAqua + AmQuel Start Smart Instant Water Conditioning Kit - 1 oz
Kordon NovAqua + AmQuel Start Smart Instant Water Conditioning Kit - 1 oz ('048054313110)

Kordon E.P.A Conditioning Kit contains bottles of both AmQuel and NovAqua Water Conditioners. This kit is suitable for treating fresh or salt water.

  • Detoxifies tap water
  • Breaks down chloramines
  • Removes nitrate, nitrite, ammonia and chlorine

The NovAqua and AmQuel that are included in this Aquarium Water Conditioning Kit will condition water (either tap water or bottled drinking water) to make it suitable for fishes and invertebrates. NovAqua and AmQuel will also improve the conditions in existing aquariums.

Many fish are tolerant of a wide range of water conditions, but all fishes need good, clean, non-toxic water. AmQuel and NovAqua are designed to be used alone or in combination to perform many essential functions necessary for keeping fishes and invertebrates alive in fresh or saltwater aquariums, including the removal of chlorine, ammonia, chloramines, copper and other heavy metals. In addition, NovAqua acts as a stress reducer by supplying the needed electrolytes and an artificial skin coating to help prevent shock and stress during water changes or handling.

Kordon NovAqua + AmQuel Start Smart Instant Water Conditioning Kit
$6.06
Kordon NovAqua Water Conditioner - 5 Gallons
Kordon NovAqua Water Conditioner - 5 Gallons ('048054311758)

Kordon NovAqua provides a protective colloid coating on a fishs body when the natural slime has been removed due to injury, disease or rough handling.

  • Adds protective skin slime to fish
  • Water conditioner for freshwater and saltwater aquariums
  • Detoxifies chlorine and Chloramines from tap water and removes toxic metals

The coating acts like an invisible bandage, providing a barrier against serious loss of internal fluids and electrolytes and protects damaged areas of the body against external toxins and disease-causing organisms.

Kordon NovAqua aids in concentrating certain drugs and antibacterial at the diseased or damaged site. NovAqua detoxifies heavy metals and is capable of eliminating free copper ions from solution.

Each ounce treats 60 gallons of water. Amquel protects pond fishes and invertebrates by quick elimination, in a true single step-action three of the most toxic chemicals commonly found in water.

1 oz - Treats 60 Gallons
4 oz - Treats 240 Gallons
8 oz - Treats 480 Gallons
16 oz - Treats 960 Gallons
1 Gallon - Treats 7,693 Gallons
5 Gallons - Treats 38,400 Gallons

Kordon NovAqua Water Conditioner
$344.16
Kordon NovAqua Water Conditioner - 1 Gallon
Kordon NovAqua Water Conditioner - 1 Gallon ('048054311611)

Kordon NovAqua provides a protective colloid coating on a fishs body when the natural slime has been removed due to injury, disease or rough handling.

  • Adds protective skin slime to fish
  • Water conditioner for freshwater and saltwater aquariums
  • Detoxifies chlorine and Chloramines from tap water and removes toxic metals

The coating acts like an invisible bandage, providing a barrier against serious loss of internal fluids and electrolytes and protects damaged areas of the body against external toxins and disease-causing organisms.

Kordon NovAqua aids in concentrating certain drugs and antibacterial at the diseased or damaged site. NovAqua detoxifies heavy metals and is capable of eliminating free copper ions from solution.

Each ounce treats 60 gallons of water. Amquel protects pond fishes and invertebrates by quick elimination, in a true single step-action three of the most toxic chemicals commonly found in water.

1 oz - Treats 60 Gallons
4 oz - Treats 240 Gallons
8 oz - Treats 480 Gallons
16 oz - Treats 960 Gallons
1 Gallon - Treats 7,693 Gallons
5 Gallons - Treats 38,400 Gallons

Kordon NovAqua Water Conditioner
$78.64
Kordon NovAqua Water Conditioner - 16 oz
Kordon NovAqua Water Conditioner - 16 oz ('048054311567)

Kordon NovAqua provides a protective colloid coating on a fishs body when the natural slime has been removed due to injury, disease or rough handling.

  • Adds protective skin slime to fish
  • Water conditioner for freshwater and saltwater aquariums
  • Detoxifies chlorine and Chloramines from tap water and removes toxic metals

The coating acts like an invisible bandage, providing a barrier against serious loss of internal fluids and electrolytes and protects damaged areas of the body against external toxins and disease-causing organisms.

Kordon NovAqua aids in concentrating certain drugs and antibacterial at the diseased or damaged site. NovAqua detoxifies heavy metals and is capable of eliminating free copper ions from solution.

Each ounce treats 60 gallons of water. Amquel protects pond fishes and invertebrates by quick elimination, in a true single step-action three of the most toxic chemicals commonly found in water.

1 oz - Treats 60 Gallons
4 oz - Treats 240 Gallons
8 oz - Treats 480 Gallons
16 oz - Treats 960 Gallons
1 Gallon - Treats 7,693 Gallons
5 Gallons - Treats 38,400 Gallons

Kordon NovAqua Water Conditioner
$25.90
Kordon Pond AmQuel Water Conditioner - 16 oz
Kordon Pond AmQuel Water Conditioner - 16 oz ('048054310164)

Kordon Pond AmQuel removes chlorine, chloramines, and ammonia safely, easily and quickly, protecting pond fishes and invertebrates by rapidly eliminating three of the most harmful compounds commonly found in pond water. AmQuel turns ammonia into an inert compound for rapid consumption by beneficial bacteria.

  • Removes chlorine, chloramines, ammonia and pheromones
  • Does not interfere with the biological cycle in your pond
  • For water changes, crowded ponds and control of ammonia during nitrogen cycle

16 oz Treats 960 Gallons
1 Gallon Treats 7,693 Gallons
5 Gallons Treats 38,468 Gallons

Directions: 1 oz treats 60 gallons of water. For fast action, add 1-2/3 oz per 100 gallons of water, or 1 capful per 8 gallons of water. A single dose will remove 1 ppm ammonia, 3.2 ppm chloramines and 2.1 ppm chlorine.

Kordon Pond AmQuel Water Conditioner
$25.66
Kordon Pond AmQuel Water Conditioner - 1 Gallon
Kordon Pond AmQuel Water Conditioner - 1 Gallon ('048054310218)

Kordon Pond AmQuel removes chlorine, chloramines, and ammonia safely, easily and quickly, protecting pond fishes and invertebrates by rapidly eliminating three of the most harmful compounds commonly found in pond water. AmQuel turns ammonia into an inert compound for rapid consumption by beneficial bacteria.

  • Removes chlorine, chloramines, ammonia and pheromones
  • Does not interfere with the biological cycle in your pond
  • For water changes, crowded ponds and control of ammonia during nitrogen cycle

16 oz Treats 960 Gallons
1 Gallon Treats 7,693 Gallons
5 Gallons Treats 38,468 Gallons

Directions: 1 oz treats 60 gallons of water. For fast action, add 1-2/3 oz per 100 gallons of water, or 1 capful per 8 gallons of water. A single dose will remove 1 ppm ammonia, 3.2 ppm chloramines and 2.1 ppm chlorine.

Kordon Pond AmQuel Water Conditioner
$84.74
Per Page      1 - 64 of 218

Categories